Continuation of the continuation of the repair ... - Toyota Carina II, 1.6 liter, 1988

And where did you get the arch. Aaa?

The arch was ordered on the existential, 1150r. here is a link to the detail
exist.ru/price.aspx?sr=29&pid=79B00A3B

Wow ... finally drugan ...)))))

I ran away to order.

Yes, I ordered and order almost everything there, and I will probably order! ..)))
The disc costs a little more than 800: www.exist.ru/price.aspx?sr=29&pid=43300F56
I also changed drums, they are a little cheaper than 900 : www.exist.ru/price.aspx?sr=29&pid=075036CF
changed everything, because to them was almost the maximum wear ..!
If you still have Circuits interested, ask me, I have a hundred times the details revisited it on your Toyota, and I know which ones fit ... besides, I changed the details almost everywhere, since I go over the car completely ...

Did you order brake discs there?
And how much?

I need a lower day ...

No, it's unrealistic, the floor panel is 27 thousand, tk. it is original, from my own experience I will say that you can digest everything normally, the main thing is to try to weld large pieces so that there are fewer joints and less rust! and coat all the welding seams with welding sealant, then where the bare metal remained with that red body, well, with mastic ... you can also bend the boxes, we made them ourselves, because they are expensive, well, the shape turned out not very good, and the weld along the entire length , so it is necessary to take out with putty! .. and the boxes must also be thoroughly spilled with mastic, or something like that ...

They counted me differently. ((
12 and
32 or what.
Did you wait for the arch for a long time?

to be honest, I don’t remember, well, maybe a week or two ...

Yes, where did you get the arch?)) And where is the set of pistons?))

and the arch and piston ordered on exist.ru, and received in stores located in my city. go out inexpensively ...

My friend, did you order the thresholds on the existential? I can't find it in any way! Both thresholds are needed!

We made them ourselves from a sheet of metal with a thickness of 1 mm, and welded a corner from the inside, and that's it ...