help, I want to change the lighting instrument brush - Toyota Corolla, 1.4 l., 1998

I already had one bad experience, bought blue light bulbs, put the color changed) but not blue, the color became somehow orange) in short, the suck turned out to be creepy)

there are not any films there, the plant puts on ordinary bulbs and they are wearing such green "handcuffs" when this device was fooling around with a LED and a light filter, and I just didn't try it, there is nothing better than the plant. Everything is easy to understand, only hemorrhoids with a speedometer cable

Thank you) already figured it out! I want to try to insert the light bulbs under the original, the current is blue, the same with the gondons!

Thank you) I will take care. And how is the beard removed there? I haven't done this on it yet)

Look, if you change the tidy, then on the middle console you need to change it, it's the same there, only the little elongated bulbs are standing, too, everything is not difficult!
Take care of the machine I have 1.3 - the carburetor 250 thousand as there is nothing to do left, and did not break, so on trifles only. I envy such a device

Damn schA remember ... it all starts from the bottom, from the ashtray. But to change the light bulbs, I took out the twists just stupidly towards myself and pull the center console a little towards you from below, everything is on clips ... take pictures of the console, what else can I remember.

OK. thanks in advance)

on account of this I already thought! and I have a brightness control in the package)

I drank an LED garland for the whole tidy, 5-6 hours and always with a twist resistor to change the brightness.

There is another option. put on the usual light bulbs handsticks of the desired color.