reverse the final

the light intensity is more than five times than the original light source. power consumption 2 watts less

better Shine than regular?

If all srastetsya, Thursday will be a sequel. The machine is very long stood on the repair( kapitalka motor)

I'll be glad to see the work done.
I don't understand the green philosophy =)

Hunting forest captivity. In my opinion the right decision. Green fu. And back up in a big car should be good.

Spahr as tomance)
To change from green to red — not work enough to be =)

Welding))))

toning is not necessary =) the machine is large. personally, I liked the fact that relegate the led is forward, the flow of light in almost 180 degrees from the stern. to perform turning manoeuvres extremely convenient

Alex! urgently to seal the tint film. #will sleetgrout. (Just kidding) it Turned out great!

10 minute stand. The led is good, radiator is too small. how much space allowed, so many did

if the maximum?)

It depends on how much to include.

Crash radiator?

Shustrik073

krasica difficult to see that he passes back)))))

Especially 200 :)

Now pedestrians will bounce)

krasica difficult to see that he passes back)))))

where and all. in China

Where the driver took

then go approx.

in the package Yes, driver. this is such a case for it =) and the black part is cast iron base of a "third hand" this is a photo of radiators no. all lights. you need to watch two previous entries about these lights. in them are visible. the limit on the 20 pictures does not do everything in one record. and briefly I don't want to.

Ah, sorry all bets are off.

I had explanations to the pics to add. The volley was not obvious. Stick the radiator to the driver is, I correctly understood? A heatsink radiator — black detail?

with such a "stick" rear light permanently include undesirable to have overheated. But, on the other hand, in reverse, usually, for a long time and so no one goes, so that's cool.

photo is still there.
radiator. but rather more of a storage tank is aluminium 4 mm+ substrate under a matrix of aluminum 2 mm+ P-profile on the back. the maximum possible space is used. the heatsink area more than 200 sq. see which of course is not enough. but enough for normal operation of the reverse gear. also the matrix has a capacity of 24 watts, but the input power to it only 15. what makes possible such configuration.
the matrix is good. its operating temperature is +85 degrees Celsius.

and how to make the cooling of the radiator? 24W is not a fucking dog if you don't do human cooling, then his life will be bright, but short.

Please

thank you, the point is clear)

The maximum speed of the led 24 watt. But this is too much, therefore not powered at maximum current. The bucket can be poured to the brim, a can and a half... with a Capacity she does not cease to be.

Welcome! please explain — 2-led 24w = 48Ватт, and the driver, one for 30 Watts. unless the driver can be less than the total power of the LEDs? What do you mean "input" power? (in my understanding Power is a characteristic of the consumer, not power devices that exceed the power of the consumer)

Be sure to look

In my blog there are some interesting things

Yes, you such emotions caused them not to pass

I am pleased that I could evoke such emotions)))

Fuck this is really cool very!

Side and the third arm is direct as at me!)

I phone. Can't. I have a blog entry about the Chinese store. There is a link

Cool, and you can link to the driver?

VVGng — is not flammable. It is great to burn. He nerasprostraneniye.
Mono lived in the car — bad form.

Well, it is non-flammable in the Car to anything. Bulky

So I'm about the same, the main thing is ease of installation. I doubt that VVGng easy to mount, although...

If desired, any wire automotive )

Many believe that the cable with silicone protection just the automobile, although worse than the good old PVA I do not know )))

let's define. what is the automotive wire? =))) which is convenient to install and to use. there is no such thing as automotive wire. there is a wire target. the specific needs and the project =)

Yes, buggy. the cross section is sufficient.
Then why not automotive wire?

Comment has been deleted

What is not small? )))) check out the bandwidth of a single square millimeter of copper wire please

my blog has an entry about the store aliexpress. there is a link

the driver from aliexpress zakazal? you can link to?

that's the difference in headlamps except xenon, there is nothing better! though there is now developing headlights based on the laser but they are not repetitive and will only go to a single-piece component and not as a lamp

Maximus2106

all pretty well convinced tomorrow with patikami SOCA to put all over the place Chinese xenon led headlights! they better Shine! thank you enlighten! HILARIOUS!

Here is the lamp, which is 10 times steeper than the xenon. And — not China. www.drive2.ru/o/HiPerLights
Have SX, there is a DRL, a DRL-turn. Not only lamps for head light. And will not be

Chinese? I us LEDs did...

all pretty well convinced tomorrow with patikami SOCA to put all over the place Chinese xenon led headlights! they better Shine! thank you enlighten! HILARIOUS!

Xenon easily surpass even these, not the best matrix. I won't even talk about these LEDs, such as xp-l in which the efficiency at all crazy.

fueled by Chinese for a long time but we put the original Phillips! although before that tried a lot of LEDs! and super bright and just what uynyu not tulli but alas, the light from a Chinese lantern ! haven't installed the 6000 bulb H3 ! they constructii most are not large and therefore do not melt anything! thank God for 2 years working without issues! with it installed rear view camera and xenon at least normally see me around!

Maximus2106

well done))) although we have been bother more)) at the back of the xenon lights is on the back)))))

used xenon 35W, after 4 months took it to hell ...Not for this ... he was fuelled longer than the butt and pass plastic popravil in the end — as observed after dismantling it

I won't comment on your confusion )

well, where there xenon to LEDs !))))) ridiculous of course but to prove I'm not going! you sir know better!

xenon sorrow in comparison with LEDs. any comparison is not.

well done))) although we have been bother more)) at the back of the xenon lights is on the back)))))

thanks for the compliment =)

Thank you! Your work is just fantastic

so

Is the tube labeled JN-8517

Special hot melt glue. It is a record of lights on the sawmill

Please tell me what you matrix is glued to the substrate?

In previous entries

and the beginning of the epic where?)

Ruin not in toilets, ruin in heads. (C) Professor of Transfiguration

well it's like he didn't love her
I've only in the basins seen ))))

In this case, it's almost not there. The old owner did not follow the car. In lanterns the earth was...

shines very well
sometimes native light very little ))))

everyone develops their own impression.
I personally already sitting in the liver these downtuning ... xenon in the PTF which does not blind, xenon in reverse which does not blind, and so on.

everyone decides . what to do. alas.
for the approach — no question, done well. but the meaning of personally in my opinion ... — without a care for others.

is the concept of the spotlight, and the concept of display ... so in this case it should not be a headlight, and the status indicator reverse ...

AlekseyPolarBear

High beam does not blind?
from the middle of the light cutoff of the light beam goes. And then the lantern even with the reflector.

it seems in the comments that the owner of kruzak will drive at night on the highway in reverse and scare and blind drivers, the back is used to drive or enter to the garage there is Parking to leave, who is there to dazzle, the owner of the post respect)))) more light, less problems, I would spotlight uracil, I can see and right, the grain on the ass of my car zahlebyvalsya

very well, if I understood.
it's about the fact that the led without secondary optics pounding in all directions and at a distance of 5-7 meters, a person can operate.
on the degree of illumination falls much.

I was a little confused about the point of standing between the blind and "like".
your idea realized.

well, read carefully it is necessary... far blind. this back up with comparable light output, xenon is not.

High beam does not blind?
from the middle of the light cutoff of the light beam goes. And then the lantern even with the reflector.

back up was not blinded. like high beam, due to the fact. that the angle of emitted light is large.

From the point of view of convenience ... for yourself and the class. But I wouldn't want to see on the road this machine, maneuvering in the night, beating the light on the eyes ...
My personal opinion is the signal work in reverse, and not light. It is better for such purposes would be to make the bottom lights under the body.
In General, the work is done great.

Thanks, I know about the work of Sergei

tleher

but there is a sane alternative?

Take a look here. www.drive2.ru/o/HiPerLights

it is in these lamps no, not to deliver normal this time. banal has no place. the camera didn't see anything in particular for lamps, full land. these are two... one hell lights to cut. to wash it was not real. there are thirty-three pieces of glass with lots of pockets. external flush nothing. plus size led there from the factory. try it, soak for a day.

Of course it's not mine, but I would just put the led bulb do not drink no matter what — in my opinion for rear view camera light enough for the eyes. I myself have done so. In short brightness is the same as the normal incandescent lamp just a nice cool color.

but there is a sane alternative?

such a cowboy job but in the Kruzak why?

The delay is due to the charge of the capacitors on the driver

If made no delay, then Denistsuprov rights. Enough to hold the selector from drive to the Parking lot and back to provide a couple of big outbreaks, because of the height of the body kruzak sharehouse directly in the eyes standing behind. If you made the delay in that respect.

Will not dazzle and illuminate. Much more Blind doldony standing in the back, when to give up trying. Not all smart enough to include dimensions to give ahead stationary vehicle maneuver to make.

Blind rear drivers.

great car in good light

From the head light in the dark it's hard to distinguish. Shines very powerfully.

Now all you can see well without extra lights)

Yes please, but what about the simultaneous switching on of rear fog advise, it really helps in wet weather:)

Thank you for your comment. The owner of the car is not prone to this tuning. The task was to improve the reverse light, the rest is all satisfied)

You can still in the room be washed down, if space is available. www.drive2.ru/l/4750929/
But I would also add synchronous switching on the rear fog :)
Nice job turned out!

Thank you

Good rear light. Bright. he done great. 5+++ author))

Aha, cool!))) Also this idea was. My friend was joking when xene ban began (long ago it was, about it can already and forgot all), he bulbs throw a pity it was, he had it in reverse zabubenil. That was glow))))

I have on many of the vehicles had xenon in reverse. Erupted a long time, and so great bodies. Only recently replaced the diodes once and for all. www.drive2.ru/l/7564654/

I'm just learning ;)

FoFo3

Xenon has a special 15 cotton, for reversing (e.g. in Ali: #) Flares Yes, long, about 3-4 seconds you need. But it shines and illuminates very well. Escape from the dark doorways in reverse is now very comfortable. Tried different diode lamps, but IMHO the xenon is better. Worth 2 years. The headlight is not melted — 30 minutes burned, check.
P. S. There is a separate power button, shake to prop up ;)

John. BOND is that you?

Ready led solutions with normal light output no.

tleher

It's not a xenon. Xenon flares for a long time and consumes a lot. Then at 15 watts on each lantern came out

Xenon has a special 15 cotton, for reversing (e.g. in Ali: #) Flares Yes, long, about 3-4 seconds you need. But it shines and illuminates very well. Escape from the dark doorways in reverse is now very comfortable. Tried different diode lamps, but IMHO the xenon is better. Worth 2 years. The headlight is not melted — 30 minutes burned, check.
P. S. There is a separate power button, shake to prop up ;)

Clear)

Yes, I understand. Just remembered the real case))))

It's not a xenon. Xenon flares for a long time and consumes a lot. Then at 15 watts on each lantern came out

Aha, cool!))) Also this idea was. My friend was joking when xene ban began (long ago it was, about it can already and forgot all), he bulbs throw a pity it was, he had it in reverse zabubenil. That was glow))))

What the land cruiser is untouchable Cars? Machinama machine

Our and nakahata kruzak)))

Please read carefully. I described

just like headlights in the back... by the way, how about cooling the diodes? even I did not see anything about it, because Pohorje or poplavyatsya that thread inside

easier light bulb) but of the THREE ) evils konenechno this option is normal)

In my opinion, strength in simplicity. The more complex, the more chances there will be a failure

bother can thermo sensor) and a cooler to put on the hood, and you can bring outside lights) but I'm also a supporter of a larger radiator) I recently got behind the radiator thermotropically)

Everything that can break, need to be excluded. Plus Kuder will be dust. In Faro to inflate. Need it?

tleher

To avoid too much heat, you need to leave the driver at least naprugi. The recipe is simple and so good

the cooler can be supplied

well, if you put on a single chip with 3...3.2 V, no options, in any case a great fall.
I always tried to 8-9V dial, but not everywhere it is needed.

To avoid too much heat, you need to leave the driver at least naprugi. The recipe is simple and so good

they always have only one drawback — low efficiency, a lot of heat in the air.
I'm not against what they have a right to life, just in a compact solutions are unacceptable if there is no possibility to remove the heat.
essno it is about the capacity is 1-2W and 10 or more, where the heat will be too much.

I do not agree. Linelike have the right to life in the lights at a reasonable installation

well, in the back and turns they if there was an efficiency higher, all super... and too much heat )
stops you can burn minutes in a row, in the heat, so there impulsnykh always.

Then linelike juzat. They do not make noise

filter just PRIOR, and the output is messy well, so that does not eliminate 100%.
he is sensitive to air noise, and I have antenna on the back.
at this rate more and escape the light... reluctant at all.

You need to use normal drivers. To finish off these noise filters

I have BJ on the strength of 5% updates )) to process the photos and reports, all to yourself ))
but in any case, 4000k diodes at 10W, no one determines that it is not the bulb, except that the brightness is higher and a little "whiter".
by the way the driver is getting a little old, now behind them 4pcs in the feet and back and turns on the parameter (efficiency of course not the same, but...), and so the noise they give to the transaction very well, even the filters are not fully get rid of. It really prevents is that amnicola when receiving weak stations.

Did not see BJ back, so can't say anything

I have a 10W, and then, if the back — others are not very comfortable.
and for 15, maybe tin...
but on the whole course of the cars even through the tint well see I guess :)

Seek and yea shall find

OK, you have so many records that PPC thumbed but probably not reached

Well... I flipped through a phone older than Three months record not see

Ahh, but in what video?

No. Bought assembled. But at desire it is possible also most to collect. My blog has an entry about the store from China.

tleher

Continued reverse part 2 in the comments there. With the phone I can't copy

you duck the driver itself collected?

OK thanks

Continued reverse part 2 in the comments there. With the phone I can't copy

Chet flipped through the blog, not found(

Welcome. Read the previous entry.

Good day!
And which drivers are used?

Xenon as light source long been a benchmark in energy efficiency

Oh tyzh Oh tyzh!
It seemed to me that straight as MUCH as the Xenon (-_-)

Will. In the blog I have a previous recording process. In the text I indicated

good topic!first time I see this!Krasava!bask will not be anything there?

pictures on the street with the phone. in the real world a lot brighter. automatic camera brightness cuts due to high light intensity.

pictures on the street with the phone was doing?if so, then live in a much brighter Shine.

as coal and a bright flame pioneer campfire

compared with the previous very different?

nope. did not like. down the middle is shining, and here in all directions

Just like the middle:)

nope.

to make on order?

partly to increase the rate of buying materials, what wholesale...
don't know exactly.
it is better to look at the price tags

hi! how to purchase left?

MrLover

tinted very necessary device) I'm here all the diodes harder looking to have something shined through the film, but the light does not compare, this is great)

The tape can fold, if you can not see through it?

Solidarity =)

light is never too much =) but in General, power 10 watt normal led is sufficient for comfortable use.

Yeah, never seen anything like it, but I have a smaller car, I think, and so much light is not required)

thank you for the compliment. by the way these ready-made solutions in China to look definitely makes no sense.

tinted very necessary device) I'm here all the diodes harder looking to have something shined through the film, but the light does not compare, this is great)

Krasava!

Sprite007

something like that but I want one button to bring! and zadolbali sometimes xenosite blind!

exactly! that, and I'll do with my Oka))

Be of good cheer)

something like that but I want one button to bring! and zadolbali sometimes xenosite blind!

Great post full of meaningful phrases. As you know, is inspired by the motif of "did not read, but condemn"...

Now, if 2диода for 24,and driver one for two 30w, what do you have? Funny.

On the tonsils ))

for that hands need to cut off

Comment has been deleted

"You can take the girl out of the village, but the village of girls ever" =)

All is well

When I turn back, for the opposite is not fine? )))

Read the text in the second entry about these lights

And the temperature of aluminium with long-term inclusion was not measured?

Aluminum and takes away

Looks great) is Not seen in the pictures of heat sinks for LEDs ( excluding aluminium cost). The heat dissipation?

You too, be healthy and happy

Fuck the author and owner of kruzak too cton blinded will pandurica preferably KAMAZ

Thank you for Your opinion about the screws

As if made on OTE...smiling))) Screws which you can see))) the Machine is not like a Lada so kolhozah

Everyone has their own way)

I'm in the city riding a nine, and under the bumper not a big searchlight or something, like Chinese DRL, not seen in action, but I think it shines the fire))))

Krasava