Drosel. - Toyota Carina II, 1.5 L, 1988

1.fuel pump (pumps benz from the tank) 2.h.z. 3. pump pressure control sensor (adjustable). 4. fuel filter (probably additional) 5.6. installation sites thereof. 7.x.z. 8. 4 carburetors (for each cylinder by carbik) 9. 2 air filters of least resistance. What kind of car?

So I, as it were, have been driving for a long time, and I started driving a GAZ-52, I did not ride injector Toyota all the time.

Yashka-Odessa

You have a warm-up on your carb and a bunch of vacuum sensors and tubes, this is controlled by your brains, you put Weber, where will all this go? How will you warm up the car? for the expense, I generally keep quiet. I already wrote, you need 3f-sge along with brains, I would put myself just like that.

Igor, you scare me 8) Where does this knowledge come from? wunderkind =)

I will pull out the suction.))
By the way, none of the sensors work ... and almost all the tubes are disconnected ... like this ... (((((
Wrong.
3S-Gte

You have a warm-up on your carb and a bunch of vacuum sensors and tubes, this is controlled by your brains, you put Weber, where will all this go? How will you warm up the car? for the expense, I generally keep quiet. I already wrote, you need 3f-sge along with brains, I would put myself just like that.

I have no brains.))))) Karbyuretor.horizantalnye vebor vlazat ...
Do askew (how to emerge) from the head and so that it rises up ...

5 and 6 are fasteners, how and where. At 5A without brains it will not work, you need to reflash, and the front-wheel drive motor is different, it may not fit.

Yes, the last two are understandable. I laid it out so that I had an idea of ​​what I mean.
Mashina.da classic some sort of Russian.che thread 6 or 1 from this series
And why are you there 5.6 wrote. The last word I can not understand.
Do you need brains for this whole pribluda?
And how will this whole thing behave at 5A?

This is a vaz 2105.

When the air flow sensor does not cope, they remake the program for it, there are less errors of any kind. Why did you disassemble such a basin?

And what is it for?

2nd dad sensor (absolute pressure) Chevy Niva.

Photos from the Internet. Yes, it seems to be collected on the contrary. With a turbo, it seems that he began to give out 400 hp, I don't remember exactly
.
And what do you think, Toyota will trample the norms on 5a.
And how much will the consumption increase? .. 7

And Che VAZ throttle will not work ...
www.meta-s.ru/product_120.html
Or is it another canetel.
You can create a collector yourself ... the main thing is to know the size of the tubes.
A pump from the Volga ...
Nozzles 4 and fe-there is an opportunity to take for free ...
They offer a black top head for 3 r ...
And tries to switch to an injector if the principle of carb is thrown ...

so in the photo there are gorozantali, but I have not heard about two.

And if you put two dampers ... like horizontal valves ... carbs ...

it won't be enough for a long time, it's just that there are completely different turns.

And if the bottom is not finalized, it will be enough for a jump.
I have a lot that is not enough from 30 horses ...

1) Throttle (by the way, from Levin) 5-7t used forgot the collector under the throttle 3t
2) Pump 3-5t
3) Force 3-5t
4) Cylinder head if finished 20t, if about 10-12 itself.
5) camshaft 3-5
6) since there was originally a crab to the transition to inx 10 more.
7) setting 5-7 or even more.
And that is about 50 tons for a discount. Plus the block must be prepared for such a top.

I am sorry.
And what is so expensive there that climbs as much as 60? ..

Approximately 60t.r, if without a turbo and all the work with your own hands.

7 air temperature sensor works in tandem with dad, see above.

It would be cheaper with carbs, but in the photo it is the injector. If you have the opportunity to take something cheaper, then simply subtract this amount from 60.

Yes on the photos it is the 4 throttle injector. 4, 6 pics is hardly a filter, because on 6 pics you can see how the wires fit to it. If you want an increase of 30 horses, I think it will be enough to modify the head + inlet, outlet. And this system is at high power.