Installing fog lights - Toyota Corolla Runx, 1.5 L, 2001

Having traveled for a while, I came to the conclusion that something is missing in the exterior of my car!

Having driven into a car store, I bought a set of fog lights from the Chinese company DLLA, all this pleasure cost me 2 thousand wooden rubles (for example, an original used fog lamp 1 piece costs 1000 rubles). Here I received a set: 2 foglights, 2 light bulbs, wires in a special protective winding, a relay, a button on the floor!

So I came to the garage, scratched my head, rolled up my sleeves and began to install them.
He removed the bumper, removed the plugs. He began to put the foglights in their regular places, and now there would be a gap of about half a centimeter! So I think a damn Chinese bastard can not do anything normally! I thought a bit, smoked a couple of cigarettes and eureka! I found a sealing rubber in the mountain, cut it to the right size, inserted it and voila it looks even very good, and if you don't really look closely, it looks like a factory one!
But as they say, my installation problems did not end there, but only began! The most important problem was where to lead the wires. On this, the first day of installing the foglights was over!

The next day, I went online, looked at how other people put foglights on and learned a lot from there! After that, having already arrived in the garage, I knew what and where to connect! In general, everything is forwarded, connected! But here again the problem, and the relay does not fit into standard connectors! The problem was quickly resolved by ringing all the connectors, the desired connector was found. In general, I did everything right now I have protivotumanochki and the machine has become prettier and of course better visibility at night and in bad weather conditions!

Price tag: 2 000 ₽ Mileage: 60 400 km