Well, Hello! Continue your posts about the opening of the headlight units\lights :)
This time managed to catch the block spotlight from the new Mercedes S class. When I found out how much it costs to replace the headlight, otherwise it's just not mend to put it mildly I sat . Think of the number of 250 thousand rubles!
Okay, let's go.
Patient:
Removed DRL + turn signal
Please pay attention to this dark plastic.
This plastic hidden Infrared diodes for Night Vision . The diodes are responsible for the recognition system
Approximate picture THIS
A brief excerpt of how the system works:
"A camera working in conjunction with two led infrared headlamps, displays on the dash display that in a normal situation would have remained hidden from the eyes of the driver. The display will show a nice, sharp picture in shades of grey, which depicts the situation in front of the vehicle and which is specially allocated people and animals, if they were recognized. If active, Spotlight, people, recognized to the curb on the passenger side will be further highlighted with a flashing light using a special module in the headlamp."
The diodes themselves.
Go directly to the diodes )
Take a closer look side
All light control 2 units
Take out the lenses. Very carefully!)
How much garbage though)
It was before the whole headlight (almost the whole) :)
And that's what remains in the end
Take a closer look . In front of you the side lenses (a diode with a shutter) White\black is the reflector for the diode.
For anybody not a secret that normal diodes in normal current really heated. Or rather fried. Mercy decided to do so this issue. (not new, but just to show)
Most interesting is what's inside the headlights really thought the duct (not great) for a normal heat, not just heat all of the air inside the headlamp.
Parse. The mask is detachable by the way.
Actually the same diode. 5 crystal diode. Just above the photo you can see the shade (grayish).
Went on. The second lens block.
As stated on one not ignorant of the forum : here you can see a lot of the collimators through the lens in the inner sections. It shines like this
Having reviewed all becomes clear
And inside underneath 2 crystal diodes. Very reminiscent of the Osram Ostar, but according to the Datasheet I have not found.
The friends all.
Thank you all friends, as always, I am sincerely grateful for the repost!
All parts of the parsing:
No. 1 the Analysis of the tail light from ML and DRL (E-class)
No. 2 Parse head light Mercedes Benz E-class W212 restyling
No. 3 Parse head light Mercedes-Benz CLA 200.
It's not for my hands. But, to change lenses on Xenon lens diode would be interested
Yes, there is such technology on the cars, that anyone with minimal soldering skills can build these, and in the presence of imagination and milky plexiglass can charge in better times!
Thank You, Nice)
Sorry of course our far from that. The only one now with diodes to drive is a UAZ patriots like. Oh, and sorry.
Man, your posts, I always look forward to, they are the best!
I repost, very interesting!
The headlamp is of course just the plague, but its cost is something!
But the internals of the headlights are impressive! Form factor lenses, very interesting!
And cooling system lights, very interesting, once it is clear that the firm, which has developed such optics not knowingly eat their own bread! On vases, send this to Faro, with a note : "look, boys, a splinter of the UFO"
Compared to pelvic-intestines do UFO technology)) Well, and of course price range on a couple of orders of magnitude different)
On a small spotlight from the impact cracked the plastic around the ear attachment. The crack sealed, but this time inside from moisture condensation and settles on the inner surface of the glass. After drying left streaks. I want to remove the glass. How to do it better to heat or mechanical scraping sealant? To the touch it is soft. Thanks in advance.
I really start did not, immediately went to the man ) you can ask) If UNIDO who left)
Hi, tell me about these LEDs, which could not be determined by DataItem.
Managed to run them? the characteristics are the same as the OSRAM OSTAR? Went to the remains of headlights with these led's, scratching their heads how to run them.
s1gne
It's beautiful, but better have a Logan Custom, there is stuffing from Audi and looks evil
well Hello =)
I have a lot of such Custom s seen. Whether here on the drive there is a group, whether a separate site was. There were a lot of projects. Loved it. Currently wanted. One problem there is no skills and where to take donor ))
It's beautiful, but better have a Logan Custom, there is stuffing from Audi and looks evil
Sorry.
Seen in the Internet as people built different headlights (Audi, Volkswagen, Mercedes) to spotlight their cars.
For example, here's how www.drive2.ru/c/1007402/ in the spotlight Logan stroili stuffing from the headlights Tiguan
Hmm, so many lights razderbanit _)) And for what? That in the future we plan to make them?
the Germans really damn extraterrestrial technology is used, generally a cool thing.especially intreresno how they did the exhaust)ATP for stateyku
ArtemDARK
W222 — lights on the diodes Philips Lumileds. Altilon to be exact. Energize small and simple booster if you got no regular firewood.
Double modules take 6V 1A, quadruple 12V1A and feel comfortable. The light is amazing, no xenon no longer want.
hi, you will prompt that where to connect?the Pinout of the modules...
W222 — lights on the diodes Philips Lumileds. Altilon to be exact. Energize small and simple booster if you got no regular firewood.
Double modules take 6V 1A, quadruple 12V1A and feel comfortable. The light is amazing, no xenon no longer want.
A-LEX8888
But such a question, stupid maybe)))
When all sbore and blocks, is it possible to light it using the standard connector, supplying power where it is necessary, or is it Kang bus some sort of controlled?You will not prompt?At least something will work? )
Work from the normal power
got it, thanks...just have to preconceiving lights 222 to 221)))
and the left connector on the input to take a picture of the wires inside?
But such a question, stupid maybe)))
When all sbore and blocks, is it possible to light it using the standard connector, supplying power where it is necessary, or is it Kang bus some sort of controlled?You will not prompt?At least something will work? )