Rolling arches Mercedes w124

When there is to be a full body painting and the wider CDs has been purchased, the time before painting roll the edge of the arches:to protect in the future the body of your pet from contact with rubber I recommend to use the right tool:)Well, or to use a special tool called "Ratcatcher arches" (he right of the Jack, not to be confused:)the First thing you need to thoroughly clean dirt, sand and dust from the edges of the arch:Wash spring water the rim of the arch:what? Shall we?The car is in neutral.
Under the wheels of the shoes.
Ratcatcher arches has universal slots for fixing it on the hub any dimension of the fastener (4x..., 5x...) with conical hubs and relatives of bolts:putting the roller rocketchiki parallel to the edge of the arch and slightly tiltable on:Given the fact that the nearest painting of car body, industrial dryer to impart elasticity to the paint coating is not applied.
If You paint the car is not going to have rascati arches is recommended in tandem with an industrial dryer, which is necessary to heat the edge of the arch to a temperature of 65-70g. (tactile - hand hard to keep, is the boundary temperature for the human hand) to give the elasticity properties of the paint coating and to minimize the formation of cracks on its surface.
Of the movement performed by eskatzeko left and right, pribludova edge of the arch under the angle of the roller:

Changing settings rocketchiki (lever length, overhang, angle of inclination) roll out the lip of the arch up, bringing her to the body of the body:the gap between the edge and the left wing 5mm to perform the painting pretreatment (cleaning of the old sealant, primer, application of a new body sealant):so now the arch looks like from the inside:To the front wings approach the following:
take new wings:the Room:This is my favorite shot clean wing:)Installed on the car and repeat the procedure.
The result of the rolling of the arches is terminated by fitting the desired drive:Control the removal of the disc relative to the wing performed high-precision planar devices:
The front wing edge turned down, leaving a 5mm gap and arched bottom edges of the arch to yourself, almost like AMG-wings:Here it is-expander:)