Nissan Almera low

yurtim

I'm highlighting numbers put the simple diode lamps Shine over a year the price of 10 rubles.
I agree with the trunk.
Don't understand why there is brightness ? For whom ?

Says there may be something that the vision did not sit down)

yurtim

I'm highlighting numbers put the simple diode lamps Shine over a year the price of 10 rubles.
I agree with the trunk.
Don't understand why there is brightness ? For whom ?

For the owner of the car there brightness

and I still smoked them, like at the traffic light, and it does not offer a

I'm highlighting numbers put the simple diode lamps Shine over a year the price of 10 rubles.
I agree with the trunk.
Don't understand why there is brightness ? For whom ?

tleher

Very well

but...that was sarcasm
img0.joyreactor.cc/pics/c...%D1%86%D0%B0-1084976.jpeg

that's what I

AndryxaGM

why flash is seen the worse the better =)

The last time inclined to believe that the lighting of "must Shine" and nothing more :)
Set the backlight with a powerful diode, I thought the rear view camera to help... only the cameras and the traffic police helped clear the room turns out... :)))
Put diodes 0.5 watts maximum and be all GOST.
And for rear view camera for Cruz XB, it is better to Shine a powerful flashlight SX to install in the foglights the same. Then all will be well.

To each his own

why flash is seen the worse the better =)

Th Depalma? )

not well, room to cover

Nuqui?!

guys just for you: spray simulator dirt

+ also not size not illuminate the room never ))

I always shoot light bulbs with illumination

cytanet

And the road can be now going back to the transport to illuminate))) Respect for the execution.

And poop in the yard now for sure will not come)

Den180

So burn this garland ills of the current regulator in a week))

can you give more details of this place? from what garland needs to burn?

Polymers with the old motherboard will be a good replacement of old capacitors

How to lose the capacity to a critical level and the flickering will appear, it will be necessary to resolder, but here it is:)

Condensatore of nonsense) in my second year plowing duty room 24/7 I don't feel tired

I agree. In front of the Elevator constantly burning LN, literally enough to 10days. Soldered on odnoletniki 8 driver for 350mA on aluminum profile and hid in the ceiling. Running for the third year on 24 hours a day. The LEDs don't bother me, but the capacitors on the driver swollen for 20000ч developments.

It will be years later...

tleher

Well, as a resource suitable to the applicant and will burn)

Will not burn and degrade;) the online led is considered placket drop the brightness to 50% from the initial.

DRL on the truck is probably 12-15 hours a day, ie 4380 — 5475 hours per year, i.e. should be of 18 years. Likely to die by 8-9 year life. Light duty — Yes, really non-stop. Only when electricista will shut down.

In the car the DRL for example. on the trucks. The hours there are crazy. Another car in my life such runs do not go as they rolled over the year. Light duty in the corridors...

If not a secret — what may work in non-stop? In the car I do not know this. And in home applications too.

I mnogie things work in non stop. Two years before the truth, but degradation yet.

I have never been able to hold on to the resource declared by the manufacturer. Made for today a maximum of 6 years. However as the actual operating conditions translate into a "continuous" time, I don't know. I suspect that in addition to temperature and current modes of the crystal at work still affects the temperature profile of the soldering object on the cost. And I have more often than not it turns out exactly to solder the led for 1.5 seconds.

Of course

Which resource do you mean? In the sense claimed by whom, the manufacturer?

Well, as a resource suitable to the applicant and will burn)

I think that of course will burn, or rather will cease to burn. Only weeks this will take much more than one. I think that these weeks will require much more than a hundred, or even 3-4 hundred.

pooh1234

Nothing in this garland in a car will not be under 30mA through the diode.

Someone apparently thinks otherwise) not everyone read the letters, planul photo and immediately understood, garbage. Burn...)) thank you for your support

Plus citizen. Well max there is 40-50mA maybe if 14V would be at the entrance. You won resistors or notebook to put if very paranoid worries ))).

Den180

So burn this garland ills of the current regulator in a week))

Nothing in this garland in a car will not be under 30mA through the diode.

tleher

Thank you Conductive your opinion, even though it unfortunately and wrongly

dude I agree 13-14 volts is voltage, and diodes 12 and resistors is incorrect, there is nothing!

Not my first Rodeo, something not consumed nifiga... Probably not do that.

Be of good cheer)

Thank you Conductive your opinion, even though it unfortunately and wrongly

So burn this garland ills of the current regulator in a week))

We have, too. 500 rubles. But a speeding ticket can reach up to 5000. so it is profitable with dirty ride

3EJlEHb

I have an Evo. The speed limit for vegetables ))))
Well, on topic, I agree. Not to break and no questions. Nevertheless, it is sometimes useful room dirty or unreadable.

dirty police body in Belarus fined)

To each his own

I have an Evo. The speed limit for vegetables ))))
Well, on topic, I agree. Not to break and no questions. Nevertheless, it is sometimes useful room dirty or unreadable.

You can ride and not break. Then the hide will be useless)

Lighting cargo compartment fire. I wish it would have done. But with the room in vain. While it is possible to drive without license light, better to drive, Sratov less.
Although the Almera is unlikely to accelerate to the speed limit, but some ;-)

Fundamentally disagree with the opinion=) Everything should be according to GOST, and farmers already tired, to stick his crap on the car in the form of ribbons of led, xenon, led bulbs wherever you can... And this "bright safety" I would like to print raskherachit, but reassured himself that it is not necessary — then because this fool still have to sit, hope that will tighten and increase the penalties for such Pribluda.

Still the guests were all "correct"...

Fundamentally disagree with the opinion=) Everything should be according to GOST, and farmers already tired, to stick his crap on the car in the form of ribbons of led, xenon, led bulbs wherever you can... And this "bright safety" I would like to print raskherachit, but reassured himself that it is not necessary — then because this fool still have to sit, hope that will tighten and increase the penalties for such Pribluda.

Support You Denisenkpa!

No my dear not belong. This is an adequate reaction to such tuningshow farmers. Especially when on the highway and you are going to face the Christmas tree with a two-story xenon, DRL alhoniemi that burn "in floor heater" in the "envelope" and LEDs in the dimensions of 5 Watt - not blinding, it lights the bottom dropped... He blinked a couple of times — say blind, put out the garland and the far more snaps in response, like look, it's only the middle — well, how so?

Crazy you.

Pv4

and for me brighter than the car on the road the safer you are... so do it right!

Fundamentally disagree with the opinion=) Everything should be according to GOST, and farmers already tired, to stick his crap on the car in the form of ribbons of led, xenon, led bulbs wherever you can... And this "bright safety" I would like to print raskherachit, but reassured himself that it is not necessary — then because this fool still have to sit, hope that will tighten and increase the penalties for such Pribluda.

Thank you

and for me brighter than the car on the road the safer you are... so do it right!

Even W5W lamp, it shines 50 LM. The two 100 LM. The one shining led 40 lumens 12 pieces. The calculator is?

Better, in practice, adding light sources does not lead to a doubling of flow from two DIFFERENT sources 40+40 is roughly 60-65. roughly 1.5 times i.e., well 12 it is necessary to calculate on the calculator)

vsegdasimka

resistance three in parralel, it seemed to me a little, although the tuk like normal, so I ask how so

Low power dissipation. So 3 pieces.

well, that's understandable=)

Considered according to Ohm's law.

resistance three in parralel, it seemed to me a little, although the tuk like normal, so I ask how so

where figured?

what is the resistance physical?

Better of course

tleher

There are not so bright. This snow plays a role)

But the light is all exactly better than the usual standard lamp.

Unfortunately I agree)

Yes, there is every second. The main thing I can not justify writing. think: "is really a knowledgeable person". You go to BJ this commentator to see how people "smart things", and there, replaced the tires, washed, photopost, again washed, photopost, replaced the rubber. All, all the entries in BJ!

So the experts are not fully...)

so here I am about too! just read the comments and lol with them. How low could dazzle? PPC just!

Shine down on the room

And what is not necessary? For this is not only the hands, head, beat it! The brightness is normalized, which makes sense to exceed it six times?

It is shining in your eyes? A beam of light goes down, or somebody's lover under the bumpers to climb?

Sweet tooth

You probably haven't ate.

As markers, the taste and color ;), and as can be candy delicious :))))

ValeraJegan

The cold and cluttered garage, and the street is not comme Il faut, in the service go there all the time

comme Il faut — so it is not very tasty candy

griha56

The only question is-why? previously, on the contrary separate button would turn off highlighting of numbers ( stealing sheep):) And now sometimes driving a car and lighting the room burn brighter than the dimensions of or stop signals, and the latter does not always work :(

That's it, your room every bonehead highlight? To hell with him. COP cameras and so make out, and the rest of Fig. I have my lights even taped with electrical tape, because nefig)

In order to was) well, I want bright light in the room, why not? Moreover, stealing sheep, he is not going...

The only question is-why? previously, on the contrary separate button would turn off highlighting of numbers ( stealing sheep):) And now sometimes driving a car and lighting the room burn brighter than the dimensions of or stop signals, and the latter does not always work :(

Hixx

Mordant is smaller. Practice I also have mastered: www.drive2.ru/l/3215601/ ))

Bias is the problem of the Chinese sludge. My antics up to 30 parallel chains without a single resistor, but the voltage and worked with for years. LEDs Samsung.

I'm sorry if Your feelings are hurt), the Council has given me a model for beginners. There will be questions about the efficiency of their craft, grace proszowicki will Help with pleasure. At the same time about possibility of connection of parallel groups of LEDs and talk.) read my blog

Mordant is smaller. Practice I also have mastered: www.drive2.ru/l/3215601/ ))

See the theory on connecting the LEDs start to learn... Thanks for your post) then all will be well.

Great Shine! Only connecting the diode wrong. Preferably three in series and each chain of three separate resistor (a pair of parallel, if the power of one is not enough). And so will break down quickly due to the misalignment parameters of individual crystals.

Why put the high beam in the lighting of the rooms? :)

I agree, but such is available to buy is not necessary, and the size fit perfect and they Shine quite bright, are delivered to the salon on the ceiling and lights under the feet and very even.

Normal variant. But the LEDs in the modules not the ultimate dream in terms of efficiency. Yes, and tightness in this case the surplus

I bought a sealed modules, for 2 diodes in the module.
Such promelspb.ru/xcat/product/69022.html

but not for that.
there the business is:
the cardboard cut out of free space.
rendered on the Micarta, cut tracks engraver and gathered the light source.
Affairs for hours =)

So I think I will try.
Thank you.

why not? any ceiling versed.

Okay, and then on my removed the entire ceiling, I thought to remove the glass and the bulb put the led module.

lamp changing from the inside out. out of the trunk.transparent glass is left on the car intact

Platonic understands not difficult, or taped(glass to ground)?

EvgeniyGennadich

Shines like a Lexus ! Good job! Cheaper was ready to buy, then more important is the manufacturing process?

Ready usually done anyhow and die quickly. And the LEDs they use crappy.

There will be questions, will help)

With result you can not argue!

The process is not complicated. However, the cost of light sources are unfortunately not cheap. But the result...

Shines like a Lexus ! Good job! Cheaper was ready to buy, then more important is the manufacturing process?

I know, thank you) what was at hand, or rather on the table in the pile of trash, and did)))

By the way if this really is you need recommend doing a chain of 4pcs instead of 3. The 30mA current drop on the led is of the order of 2.75 at 40mA of 2.85 V. Personally did 4pcs and 1 resistor 47 Ohm, which gave a current of 60mA at voltages of the order of 14V. The resistor in this chain is heated much less.

I was about say. When changing the polarity of the led does not break, since the current will flow through Schottky barrier, and provides more in ebraico LEDs

Well, why not? Because EMF when the gap has the opposite polarity and here is just the built-in Schottky take a shot. The principle of operation of course the other unlike the rectifier diode, do not give to break the circuit due to open circuit for reverse current, but they have a common goal, not to give to break the crystal.

In your case, the Schottky diodes in the led housing installed a counter in parallel. This is a little something.

Did, did not add Schottky barrier at the entrance and three years is already working without problems. The only thing that I have a led Samsung, and they have built-in Schottky. However, such LEDs have to be careful, if connected incorrectly the fuse burns out.

...and therefore a rectifier diode in the circuit can be neglected.

so there are powerful inductors among consumers.

let's just say, the Japs have 2000 years( the motorcycles. personally dismantled and not momentary) the led lights no rectifier, no diodes, led circuit, but the resistor. and everything still works

Yes 15 volts is nothing decent inductance when the gap current is easily a hundred and a half in the return line will.

and the led is not a semiconductor? =)
three series-connected for 15 volts to the return line hold, plus rezyuk.
and so nothing will happen to them

between + power supply and diodes. From the inductive emissions. Although maybe it is paranoia ))

diodes at the input where?

Bright. Great. But I would add diodes at the input.

there are about 120 LM.

I think too much brightness, can pull up for it, judging by the photos direct blinds

TecHblu

Wouldn't it be easier to buy a Chinese led light bulb . Would deprive himself the pleasure of soldering hemorrhoids. But in General looks great I also are the diodes...

and throw them the next day? a good led light bulbs cost the same as manufacturing 10(and maybe more) led modules independently, given the parts and time

easier does not mean better. soldering is not hemorrhoids at all

Wouldn't it be easier to buy a Chinese led light bulb . Would deprive himself the pleasure of soldering hemorrhoids. But in General looks great I also are the diodes...

it's not mine

uh ...I hesitate to ask, it is made for those who want to get a better look and remember your room?!

Don't do that. Progress is everything

I sometimes think that if all people were like me, we'd still be eating raw meat and doodling a stone on a stone!)))

We need to engage in self-improvement)

Fine, but don't option for me (hands not from that place grow( )

a photo of the product from a couple of angles would be enough

you can ask

the photo to the crafts look interesting. MX any I suppose...

Do a normal straight-arm people. Gave lifetime warranty) Through 4.5 years one diodik became tasklet. All warranty is handled. Again, all fire!)

one led is not reasonable to transform the voltage in the vehicle electrical system to supply current for any PWM that immediately complicates and increases the cost of construction or lineiny and hellish heat, and therefore energy efficiency of such a device tends to the efficiency of the bulb.

put in plafonchiki only one., but super-bright cree diode, so the result is better than here. Now I think to cut it out of the box from the CD, the transparent plate, to zamarinovat them with a thin cloth and put as lenses. It would be cool!

Pasha72Ru

On what basis are matched resistors?

cxem.net/calc/ledcalc.php
for example here

That's not the principle, and the law. Ohm

On what basis are matched resistors?

Which is it?)

Well, let's say :)

However, the DMM readings is, it perfectly clear that the 60 mA on the two chains of food, and it is 30mA per branch. LEDs have maximum power 150 mA Cho there breaks? ) the car will survive...

Do you understand what I wanted to say :) burnup of a single diode pair in the whole twice the amount of current going through the second and he, too, quickly will the Northern fur animal, after which will turn off all interior light :)

LEDs do not fuse)

Or I something do not understand, or when fading a single led will be a chain reaction to burn the rest...

Shaem

one diode would be enough for the room...

And the rest is heating the air? Nonsense!

Someone would who is not.

one diode would be enough for the room...

The beauty of it is in comments. Sometimes there is a thought, but to Express in the text of the question comes out clearly, or write a bunch of text lazy... And then BAM! Someone already asked for exactly what you need. Yes, and the answer is already there)

Try to read all to cover. Really — in the comments skips a lot of useful information.

How many people, so many opinions) the most writing theorists who read a couple of articles about LEDs and have no experience in the field) I recommend to read the comments to all my records( unless interested), sometimes useful information can be gleaned not only from the record)

Not lazy, I read all the posts. And laughter, and sin. Some write, like, the size of the bulb povytaskivali, others will burn out...Those who are without dimensions riding — guys, wait, you will fly any carrier on a Chevy Tahoe with a car weighing under 3.5 tonnes and Registrar GPS are not paid. Though the roofing material machine break. About burn/will not burn out. Again, guys, human practice, and theory in store. What nonsense to drive? You start to flip through its pages.

?

Easier does not mean better

wouldn't it be simpler to stick the diodes in a regular cartridge?

The soldering iron thing multipurpose. Even using it for other purposes, you can earn money or get profit) a matter of habit)

He did good it was very good, I really liked it, he thought about it, not many know how with a soldering iron to apply)

Revers87

You do not understand!
Need it, whatever your number clearly visible on the "letters" ))))

Infrared cameras on the backlight is absolutely not care. Even in the dark without light room, the letter will find the addressee

Yeah. A fine quarter and deprivation of rights) is Certainly better.
Smeared a piece of dirt across the front of the game — the penalty for recitement 500R, with a "discount" — 250)
What is easier?

I understand you and understand why this is done, then that even more clearly "read" the room to do powerful emitters in the infrared range and arrange them in a frame along the contour of the room, and the visible spectrum it does not roll, passed... And even better here it is:

alpalbuk

Everything is good, but why?
Why light the room more intensely than it was?
I believe that a more fit option, this rear light when reversing for better visibility...

You do not understand!
Need it, whatever your number clearly visible on the "letters" ))))

Everyone has their own motives

Everything is good, but why?
Why light the room more intensely than it was?
I believe that a more fit option, this rear light when reversing for better visibility...

Thanks, will take into account the fall.

The LEDs 150 mA current in 20 mA, the voltage drop should be below about 2.8 V. you Need to read Datasheet carefully. Namely schedule WAH

My brain is cooked))))
Take the calculation coproca to the LEDs:
— 3 PCs 5630, consistently
the voltage at the input 12 In
— voltage on led 3.3 V
— current 150 mA
Total: 15 resistance in Ohms capacity of 0.5 watts.
You have 220 Ohms. Three pieces is about 73 Ohms total.
Output — supply-current 4 times.
But if you take that when you opened the engine, chain walks to 14.3 In, you need weather resistance 33 Ohms. Then the stock 2 times.
Out normul)))))

) resistance specifically here are selected based on local conditions. A special case to take as a rule not necessary.it's not best practice)

Thank you, I have hundreds of them, now I know what resistance to put

Yes. Maximum current 150 mA for them

5630 0.5 W?

A year and a half recording. The work is primitive, and the number of hits in the Top... Almost 45 thousand views)

good result

Yes. Noticeable.

good it turned out there where the comparison with the thread of the filament, one can see the difference)

Everyone Sandpiper praises its swamp)

Too much. I put myself on vodki to the lighting of the rooms, then back to the regular bulb back. Shine some butts okay.

Any of the options are correct

I just bought the led lamps... 40 rubles each... it's easier.

Okay. Of course light, but not bright

not too bright? or in the real world quite differently?

Thank you for this opinion. It is very important to me. ))))
But the camera doesn't care whether there is a General illumination of the room

How annoying the farm when the number lit up at night with eyes shining brighter dimensions. But on camera fines will be accurately recorded.