Polishing of the facade cased drives BMW
Ronal.
A good manufacturer disk:
But as many disks that are factory machined with frontage on a lathe and then lacquered, they have several disadvantages:
During the years of operation the varnish was damaged on curbs:
there were Also internal surface corrosion under the lacquer in the form of white wormholes:
Well, that curb damage is not deep, up to 0.5 mm
Masking tape sizing openings, in order to protect the paint in the process of grinding and polishing.
Vibroisolating in the form of iron carry a full sosotoyanie from the front of the disk of lacquer grain 80:
Then go 100, 150, 180, 240, 400 and 600 grain
Polishing tufted circles of my set with a drill on such a thin and long surface complex.
Thread the stitched circle clings to the sharp edge of the surface and pulls the paste on the polished surface:
To combat this it is often necessary to wipe the remains of the paste from the facade and to change the direction of polishing, thus working through the entire area of this small surface:
working Hours turned the facade in the mirror:
Remove the masking tape and my drive antisilicone:
Dressy?
Definitely!
The disc also deserves attention:
it is Necessary to wash the dirt from the rubber
And glue weights:
the edge of the flange in the process of washing antisilicone sizing the plastering in 2 layers, so you can drive to put in bluntly:
the result of resuscitation disks:
immediately send the disks into the lab
To test the roulette:)
Your disks can also be mirrored!
that's comforting :) I know. I just put myself BBS BMW Style 42 polished shelves. Studied Your video. We have had the experience of "active" cleaning with subsequent tarnishing polishing paste Autosol Metal Polish. Thanks to You, not afraid now of this case
COSWORTH23
Novel, in no case, neither with the aim to get smart or to teach but rather to learn. Your works always watch with interest. )) Just without the lacquer will not go over time, the oxidation under the LC coating on the lateral surface areas?
there's no go
I went on polished disks of season 2
on my website there is a video about the care of polished wheels
do You have the experience of operating the polished disks throughout the season?
Novel, in no case, neither with the aim to get smart or to teach but rather to learn. Your works always watch with interest. )) Just without the lacquer will not go over time, the oxidation under the LC coating on the lateral surface areas?
A master of his craft. Yes the results are great. Roma Perley in Lviv zhyt, and we do not have enough good disks)))))
Great job, as always! :)
About discs original sanding looks better. Sorry that we cannot be recovered, no machine anywhere(
What antisilicone? Launders well? And what ever the problem is to wash the entire Kaku.
Using the orbital sander has done all the work(all grit) or are You her only the lacquer is removed?
I looked, thank you. I have a question arose if the operation at all times of the year, how much is enough Shine?
You watched the video?
the video shows the status of the disks before and after washing
disk without a lacquer
mirror as my avatar
(also the disk is not lacquered)
RomanMers
absolutely
varnish reduces the mirror properties shelf
and adhesion of polishing with polishes not very
I don't apply any varnish
(my client paint a ceramic varnish myself)
I believe that the care for the polished surface is fairly simple:
www.romanmers.com/questio...myit-polirovannyie-diski/
And if not to varnish, the disc will fade?
absolutely
varnish reduces the mirror properties shelf
and adhesion of polishing with polishes not very
I don't apply any varnish
(my client paint a ceramic varnish myself)
I believe that the care for the polished surface is fairly simple:
www.romanmers.com/questio...myit-polirovannyie-diski/