Recovery disc
How it all began
For the first time faced with this case even when just started to slowly do a CD rather even we are forced to.
Come on BMW wheels RH topline r17 8.5 j 9.5 j
Wheels happiness
It was decided to paint the centers and Polish the shelves. Then the machine polishing was not — pulled up the car, turned on whether 2 or 3 gear and since both sides sat down and did meditravel.
After I gave the discs at the painting and then the fun began.
We were told that no problems will color the centers and not spoil the polished shelves. In the end, to paint separately at their center for some reason came out plus they burned the plastic centers and shelves needed re-polishing.
Took the wheels and drove it around even in the office powder coating and everyone said the same thing: separate the centers to paint not only the entire. After that we decided to paint themselves with regular paint. The only thing we didn't know about ceramic nail Polish and so I used regular, but HS is hard.
Here's what happened:
Minus: get a mirror on the shelves did not work — as it turned out because of the metal alloy.
Now in the case.
I do not think that for someone to discover America, but I hope that info someone will be useful.
Teaser
Bullies on the shelves were cleaned carefully with a file, if bullies were particularly deep it is first brewed.
Polishing shelves
The sandpaper used in this order: 200 — 250 — 300 — 350 — 400 — 420.
On water 500 — 600 — 800 — 1000 — 2000.
Paste
Paste for metals WURTH
Here's a brick crumbles with the help of a kitchen grater, diluted with WD-40.
Is applied to the felt or cloth and can be polished shelf.
To finish was made famous Doctor Wax and cotton pads.
Machine
The machine we have here in this form, still can not reach the hands to paint it and make a normal on-off.
Frame, with one end of the tube. The pipe is welded a wheel hub from a Mitsubishi GALANT, is inserted into the hub part of the drive and on it is threaded.
On the other hand three-phase engine on an adjustable platform for belt tensioning.
The disk is mounted with a cone which, when the nut centers the disk
Thank you all, all good!
