Front door acoustics - Toyota Carina E, 1.6L, 1993
During the operation of the car, vibration and noise isolation of the front doors was made, and later the idea came to make podiums with a tilt under the speakers in order to direct the sound a little upward. The pioneer speakers are not the cheapest, tweeters on the racks, play through the seats, but I'm thinking of changing them to something more expensive, for example on DLS.
hmm cool thought if I'm not mistaken then there is a 13-inch staff right? did you put it on 14? By the way, since such a sausage went so Mona and fiberglass with epoxy finish the outer panel! )
I don’t know in inches, but it was written on the box from the speakers of 17 cm, in general, the speaker is closed on top with a regular mesh, I just didn’t, and I don’t have a picture with a closed mesh. I plan to put two speakers on the door and on the midrange, so we’ll still tinker with the fiberglass )
but I caught up with everything) I thought the regular grid was cut! (now just
got a closer look) and 2 dynamos are strong foty I think I will not wait alone! ;-)
Interesting topic! can you take a picture with the standard grid? in the sense that the door is assembled ...
The mesh is just not standard, slightly altered, a photo of the door in the logbook (Interior styling), this is even before the tilt, but apparently there is no difference
It turned out well. I myself am thinking what to do with my "door speakers" ... I bought the Pioneers, put them in their regular places, but the sound is not so hot, although they all praise the dynamics (judging by the reviews, forums). So far, there is neither time nor money to deal with podiums and door insulation ...
The speakers play through the amplifier, or how, and in general what power they are intended for, or maybe they are under the amplifier, so they cannot be pumped from the radio alone
yes, too, I think to do the doors and front music! Only advice with columns is needed! I will throw the amplifier at them, and is it worth doing vibration and noise isolation? By the way, I don’t want to be driven off the podiums, I’ll probably put one of the options on our vases!
It is imperative to do vibration and noise insulation of the front doors, the speakers will sound better, there will be no extraneous clattering of doors, the more you will do through the seat
and how many clips from 4x are now intact left near the speaker which? and in that place the lining does not brynchit when you make the music louder?
The outer wall of vibration and spleen, removed the window lifter with attachment to the door, internal pure vibration (I would recommend two layers of vibra 1.5, one layer walks on bass), sheathing glued like thin thermal insulation, well, it was still playing around with Shumkov.
everything interests, did you make noise as in the photo, or did you still disassemble the door further? thrust there, etc. ? while the warmth I want to bring everything to mind.
Yes, they rust, but in our area it's not critical, my door edge touches the overhead threshold, so I don't know to paint there without showing off, I don't know, until I bother.
You lower the glass, and pull the top of the triangle towards you, it will snap off.