Polished 18\\u0026quot; CCW. Result.
The second part.
On the rim inside ugly traces of brake dust and weights, they were washed with antisilicone:
Also cleaned the dirt from the rubber on the outside of the disk:
Clean planting under rubber, good insulation through the air in the tire:
Polished caps:
a Complex pattern of spokes of the center (long, thin surface) is gently polished drills and my laps for polishing:
Simultaneously eliminate minor scratches on the surface of the centre:
Shelf dry sanded with 600 grit paper on the foam which, owing to its permeability and good chip removal very efficiently prepares the surface for polishing.
Regiment after polishing is a kind of new:
the Centre also polished:
Now take the items according to labels:)
is another matter!
Shelf has a clean mirror up to the center:
a Summary of the polishing disks is as follows:
around the nipple now, all clean:
And at the base of the shelf:
And top:
And inside:
And caps:
That's so refreshed:)
Selfie with the buttons on the memory:)
I 204 went every day
the fully polished wheels
just a little care and patience
and everything is possible
RomanMers
so says the one who does not have the polished disks
I have 3 years go for polished wheels
care polishing is simple:
www.romanmers.com/questio...myit-polirovannyie-diski/
And yet, wash with normal shampoo contact. We have 99.9% of the touchless washes. It is also sink or what to choose? Especially fun to do it in the road as thousands of five kilometers behind poltorashku and come to an unfamiliar city, driving around at night looking contact cleaning. I say fair sample. Not to drive
Special Polish for aluminum. Know-how SA-group. The names do not know)))
Covered himself, and the SA-group, they also Solomon Alsberg
amojnoya
Exactly. If I didn't personally polished aluminum wheels on my motorcycle, if after the first wash they were covered with spots, I would have believed you. No offense.
Covered with a special varnish for aluminum, and everything is OK.
what varnish, what is it called?
of course
touchless car wash with the active components is prohibited
everyone knows it
I wash the regular shampoo
and not I
and give it to the washer
Exactly. If I didn't personally polished aluminum wheels on my motorcycle, if after the first wash they were covered with spots, I would have believed you. No offense.
Covered with a special varnish for aluminum, and everything is OK.
so says the one who does not have the polished disks
I have 3 years go for polished wheels
care polishing is simple:
www.romanmers.com/questio...myit-polirovannyie-diski/
Great! But the first washing and all Hello!
If the varnish not cover the full figna. Only a showpiece
openings I didn't touch
the discs were polished in the factory
I just refreshed the polishing center
The sides of the spokes too polished? It turned out to crawl in there with a drill?
center polished at the factory
I just upgraded facade
I think under the bolts to oxidize will
The novel is polished or chrome it? Here
I like the idea of the centre is also Polish,
but I'll never know how to Polish places under
the bolts and place it under the nut? And the second question, as
then to maintain the Shine in those hard to reach
places? Will not oxidize under the bolts?
RomanMers
nope
care for polished aluminum simple:
www.romanmers.com/questio...myit-polirovannyie-diski/
Almost one in one as my question) Here and the link found.
nope
care for polished aluminum simple:
www.romanmers.com/questio...myit-polirovannyie-diski/
Great job! Current ETOGES alimini, he soon PTS will be oxidized. And to cover with varnish?
Understood ;)
he not long ago began the same polishing...but confuse between the spokes...it is not just ))
themselves center completely polished for the plant
othertown
I just updated the polished facade