Local repair discs AME SHALLEN - R18 for Taras.
Hello! Approached me Taras haxedby with a request to put in order before installing on car wheels - AME R18 - 8,5/9,5 J. He ordered this kit from Japan. The discs came in good condition, but on the edge in some places, was curb the disease. Taras this moment was not to their liking. He asked to come up with something with the bolts, as they oxidized and got chrome.
Disks are not portable. Shelf the disc is covered with a metallic coating from the factory. Since I have some experience in local work with the edge, I did the following way. I gently removed the cover to bend at the photo you can see everything. Removed all burrs and defects. It is difficult to make a perfectly smooth border. On this model drives the bending is too smooth and there's no clear distinction between the wide part of the flange that goes to the center of the disc, and a thin "border" edge. Well, the whole effort, I still could make it clear. And the transition from polished metal to covered with a protective coating is not evident. I also replaced the bolt imitation on the new bronze color. Polished chrome stub TSO, and some where painted chipped matte black centers of the disks.
I want to show my way to hide my visible chips on the shelf quickly and locally — photos 15,16 and 17. Use metallic chromium film and cutting the desired diameter. After bonded to the chip on the shelf (paint, chrome, anodized, etc) and he is not conspicuous!
Good luck to everyone and beautiful drives!
Healthy! This of course is not a modest question. And could not make the same stanochek for me?
Thank you, the following post can be pictures of the machine without the drive for personal so to speak use? And about the chips — the secret?
axis as the shaft with its cylinder and bearings for a quick analysis of this design. All this is inserted in the cylinder and clamped by the bolt.
And can be more than chips closed? The second question is the axis of the machine drive is just stuck in the cylinder or rotates on bearings?
well, Yes, but then instantly. I have fouled and still on the old your set is approximately 1.5-2 years ago. Okay so I skated on it and sold it to a guy. in the Drava it is. The whole thing showed him he had no problems. Then you know he also sold the other, don't know how she has or not))))?
faster and most importantly... I have a small area for 20 minutes exactly left)
it is clear, at its option!))) but I have a method in some more comfortable degree for those who are not Polish!
OldSchoolGarage
Thank you)! If suddenly in a year 1 time and you will fall off it'll be replaced by another 2 minutes! No problems works well and costs are minimal. Especially if you gently wash the shelves, as I always recommend it for a very long time!
by the way... I remembered I had a different experience, in principle, comparable to your circles... were the first discs of this entry www.drive2.ru/l/5894713/ — BIMS Kaiser...
standard dirt, chips, porters ran into the centre car hike — traces of wheels anyways... and of course Bandurka...
regiment, in principle, they are very comfortable J-shaped, ie the curb turns on the narrow edge... so I have this thing all vyrovnal, sanded and palynol... but 1st place was with a score inside the edge of the Japanese than the dented - can reinforcement what... in General, I pasted on 3 sides with masking tape, visceral and palynol place... 2 vertical lines was certainly noticeable... but in principle also not too bad... but certainly long
I feel sorry for itself this place is not thought to zavodati...(((
Thank you)! If suddenly in a year 1 time and you will fall off it'll be replaced by another 2 minutes! No problems works well and costs are minimal. Especially if you gently wash the shelves, as I always recommend it for a very long time!
Krasava, you know what it is so cosmetically restore disks — hard work, you sit and all sorts of nasty bends clean, clean curb, polished scratchy))))
See also use partial polishing, with experience come the most effective solutions himself to the same technique have come by way of experiment, only the border of the masking tape represent...
By the way I noticed that the black color in terms of touch-up chips with remontoprigoden!
With circles from aluminum tape is an interesting idea — it does not fall off? just from the body, with painted metal drip happen after a while...
well, for photos single respect, so much detail I forgotten to take a picture))))
volvovan
Gorgeous!
Will I benefit ;)
And bordure on the "machine" should be removed? manually smooth surface will not work? You then shelves covered his MIRACLE varnish?
I will say in my experience — I have a dozen sets from different degrees barducci treated — without the machine... it's certainly much faster and more convenient and I'm going to fly to build... but in principle, if it is necessary to treat 1 kit — it is possible without it...but without the guidance experienced the first time can be a good coachnet)))
Hi, no in this case I don't varnish. Not an option! Me once a season to bring himself or to refresh them. I tell him that everything no problem!
Gorgeous!
Will I benefit ;)
And bordure on the "machine" should be removed? manually smooth surface will not work? You then shelves covered his MIRACLE varnish?
And another question...are you in this photo and left the sink? e-a.d-cd.net/6d73c62s-960.jpg or podmareva or more praticial?
Very deep zaplavlyayutsya with argon, then grind. If not very deep then you can just whittle away rough skin!
as always cool! and as always guys don't understand — how do you deep cleavages patched)))))
And polishing then Goyim or what? And where are the screws to find, you have no case? Thank you!
Plz tell me, deep chips, but there are bordure mm maksimkm in depth shlifanuli to 600, then wanted 2000 and GOI will work? I also do not parse eurolines. But the main question is where the cogs take on the M8, I have a General sadness with them((( can black
watch
Metalized film for a long time will hold?
Under it spackle ?
Well, if you want, stick it carefully on cyanacrylat will be for ages)))! On account spackle at will! If it turns out to gently pull and viscoity chip no problem! It is possible and without it.
Well, not strange a long time ago, I skated and I kept after I sold the kit!