Lathe turning and polishing shelves of disks AMG
You have managed to acquire a set of original AMG discs?
Drives smooth.
But the state of LKP drives not allow them just to put on the car:
All because the paint on the façade is slightly scratched and the varnish on the shelves a little shabby:)
the Option is there!
Sandblasting and painting polymer total disc:
Front:
Rear:
Many of You on this and finished recording:)
What I do next?
Sizing the facade and part of the rim with masking tape in 2 layers:
And on a lathe protecive off the shelf paint and 0.2 mm of metal to eliminate traces of sandblasting:
getting a clear boundary between painted facades and future polished shelf:
Clean and beautiful rim:
Wrap-around stretchlinks:
And easily polished shelf my polishing kit:
10 minutes of two polishing pastes and stitched fabric circles give the desired result:
Remove the masking tape:
antisilicone And wipe the whole disk of dust:
Receive the beauty:
With a clear boundary transition between the polished and painted surfaces:
a Satisfied owner kindly shared cards:
risk after Turner remains
but then everything is easy soshlifovat
paint brushes and polishing of aluminium two big differences
I have a DRY sanding disk 240, 400 and 600 takes 2 three-centimeter strips of sandpaper
this is such a good sandpaper
it chips not clogged
and polishing then takes only 10 minutes
here is a good video:
www.romanmers.com/shlifov...za-30-minut-pryamoy-efir/
I understand, so a good Turner. I have experience in tokarki less, so afraid to leave the risk from awkward movement, which is then not spoorweg.
By the way, I tried to Polish it by your method. Had still to reach 1500 first skin as there were deep enough risks from those less than 1,000.
Also wonder why polishing is done on dry. I shall do as you advised, but the guys who know the paint business in bewilderment, they say that water efficiency will be the same, just the skins need at times less because it will not be scored.
If interested, look, I made a note about the discs in tokarki www.drive2.ru/l/6733470/
conventional Turner removed the paint carefully
no secrets
and then I sanded and polished
You didn't understand my question. I have a lathe, so I understand what you're saying. But the question is about how the cutter to remove the paint so neat.
on a lathe to remove the paint layer and 0.2 mm of metal possible Turner
next is the grinding and polishing is already on my machine
I wonder how tocart to remove the paint while keeping them risk? We just do polished wheels tokarki, but to remove the rough layer by using tokarki like?
Great result!
And the care of such shelves 15 min every 2 weeks!
From my own experience))) but with a set of Novel!
on a lathe paint protectives safely
without chipping
never tinted
the powder is not colored:)
the polymer is baked initially
WOW, sounds promising))) tell me how? how to remove Pasco this to powder paint didn't fall off and judging by the photos, are you still there tinted)
very nice! but personally, I would the middle of a disk painted in black — the regiment would become more noticeable.
It's just not the best photo, but generally the shelves are on fire ! And in the evening light the lights, yeah when the car is in motion just a holiday for you !
no
I described in one of the last entries reasoned attitude to the lacquer
and care for the polished shelf is simple:
www.romanmers.com/questio...myit-polirovannyie-diski/
the customer ordered is the polished shelves
to the lacquer I have my own views - I have it in the blog outlined earlier
thanks for the feedback!
RomanMers
can
but the client expressed a desire to Polish just the outer edge
to get closer to factory performance
damn it is confusing to read: what all is not palynol? nifiga not read the previous komenty
the work done on 5+
have not tried to cover the shelf polyurethane powder lacquer, of course the Shine is not so will be
Got this issue, you know. Then revered. And on top, the first thing that comes to mind. ))
By the way, I also had nail Polish underneath got spiders. Long thought to paint, but then I stuffed it with emery risks equally on all disks. Yes, so I liked that and left. Also thought, it is not difficult time in the season when the kit is stored for the winter, again chuhnut and RUB with paraffin )
RomanMers
can
but the client expressed a desire to Polish just the outer edge
to get closer to factory performance
And polishing heavily oxidized? Unprotected aluminum?
can
but the client expressed a desire to Polish just the outer edge
to get closer to factory performance
don't listen to them! ...your work for gourmets! someone finally hubcaps with spinners give!.. confirm the POLISHED EDGE of the DISC-CHIC! my CDs from the factory with this shelf was!
and I have to read?
e-a.d-cd.net/edb592s-960.jpg
color disks are the same
so reports photo
in life - trust me
polished shelf is chic!
so much work and then again — it is not readable on the machine.
KMK blame the color on the black it would have been pronounced and everything in the same color tones masked
Cool as always... in the original does come with a polished shelf under the varnish, and it looks much better than a fully painted piece, how to paint them... many I have, there lies 2 sets of different amsec in native coverage... came comrade at 210m and as much saliva came forth, the same narcomaniac)))
By the way, Rum, I remember 2-3 weeks ago there was talk of removing this chrome centers... like someone even promised a report on this difficult matter... not intend to write on the chrome? and I still to their ancey in chrome does not work — go around and think) and indeed many think this will be an interesting topic
it turns out you aluminum palynol? and its the same kind of need then something to cover, otherwise it will oxidize mm?
MyNameEarl
The wheels look heavy, bulky and not very tasty.
this is an original AMG rims
but everyone has different tastes
you may not like the original parts
is this normal
RomanMers
this is an original AMG parts
they have a closed form
but that doesn't mean what You would like
many people like open thin spokes
is this normal
Yes, the discs themselves are fine.
The combination of polished shelves and silver paint — no. Well, on taste and color, the main thing that you liked.
lxnvr
Short: farm.
this is an original AMG parts
they have a closed form
but that doesn't mean what You would like
many people like open thin spokes
is this normal
form design is chosen to be close to factory performance
I Polish the wheels and fully
but the sales order was as follows
The chrome edging on the fan, would have done all the chrome ;)
And so the work on the restoration done on 5 plus.
no
do you think I have 4 years go for the polished rims?:)
care of polished wheels is quite simple:
www.romanmers.com/questio...myit-polirovannyie-diski/
shelf small, lost in the noise. Or the middle of the darker to do, or on the contrary should have been the middle of polishing.
may-day
And brown and begin to oxidize and corrode. And not eventually, and pretty quickly. In the industrial use of aluminium(polished or not), the part or workpiece, undergoes additional chemical treatment method in several stages, to give a surface protection of the protective layer.
In the "home", "household" conditions, as an alternative to complex, expensive, and not everyone is available to this method as an alternative may be selected, also used in the manufacture of alloy wheels some of the models( such for example, as "Exel" and their Chinese replica), when given a model of the glossy surface, is performed by using finish machining on a lathe. Of course, the amalgam of the reference mirror in a similar way not to achieve, but the result is apparently quite decent, not matte and basic, has the necessary adhesion for the application of the protective layer coating in the automotive lacquer.
The disadvantages of this method is the need for specialized machinery, it's still not a perfect mirror, the surface is "soft", ie easy to put a scratch on it.
Pros - not every hand some aviation plant without the level of secrecy, which can be attributed to the polishing processing, while the lathe drives can be found in any major settlement. Subsequent painting can be held in any "collective" conditions.
The author's branch of the enforcement process, its execution and, as a result, the obtained result, worthy of respect, but a proposed method of care for the surface, for most users, using personal vehicle as a daily and year-round vehicle, IMHO, is difficult for several reasons and the main one, the lack of time, resources and opportunities for individual equipment post car wash or, in the case of use of third-party, paid associations the possibility of applying them are different than those used everywhere, it means contactless chemistry separately for body, powertrain, or disks. Simply put, washing your car poured, foamed, knocked, rubbed. No one at the sink for the road. will not be separately you wash the tires, close the molding from the foam and polishing after wax or abrasively.
All wisecasino in no way implies any sort of negativity to the author of the thread, based only on their own experience and is purely informative in nature to questions posed in the discussion topics, questions from interested users. I apologize for the volume of the text with respect...
all well-written. support. :-)
The fact of the matter is that the Polish on polished surfaces, is pleasing to the eye than one month, two, three, depending on operating conditions. Next - start pieces to flake off, exposing not aesthetic spots, Samtavisi pieces with a touch of oxide. This method is suitable only for machines of the day. In my case, after processing the same set, without damage there were only a spare wheel. Basically knew what was going on and what will happen on this treat this for granted. A same people, can grasp this difficult and time-consuming process( a dispersal of black spots that is), maybe we should just give up.
so well written as a report to management) in other words, you think that you need to cover with varnish anyway? but how?
40-rus
And the water it will not darken the contemporary ?
And brown and begin to oxidize and corrode. And not eventually, and pretty quickly. In the industrial use of aluminium(polished or not), the part or workpiece, undergoes additional chemical treatment method in several stages, to give a surface protection of the protective layer.
In the "home", "household" conditions, as an alternative to complex, expensive, and not everyone is available to this method as an alternative may be selected, also used in the manufacture of alloy wheels some of the models( such for example, as "Exel" and their Chinese replica), when given a model of the glossy surface, is performed by using finish machining on a lathe. Of course, the amalgam of the reference mirror in a similar way not to achieve, but the result is apparently quite decent, not matte and basic, has the necessary adhesion for the application of the protective layer coating in the automotive lacquer.
The disadvantages of this method is the need for specialized machinery, it's still not a perfect mirror, the surface is "soft", ie easy to put a scratch on it.
Pros - not every hand some aviation plant without the level of secrecy, which can be attributed to the polishing processing, while the lathe drives can be found in any major settlement. Subsequent painting can be held in any "collective" conditions.
The author's branch of the enforcement process, its execution and, as a result, the obtained result, worthy of respect, but a proposed method of care for the surface, for most users, using personal vehicle as a daily and year-round vehicle, IMHO, is difficult for several reasons and the main one, the lack of time, resources and opportunities for individual equipment post car wash or, in the case of use of third-party, paid associations the possibility of applying them are different than those used everywhere, it means contactless chemistry separately for body, powertrain, or disks. Simply put, washing your car poured, foamed, knocked, rubbed. No one at the sink for the road. will not be separately you wash the tires, close the molding from the foam and polishing after wax or abrasively.
All wisecasino in no way implies any sort of negativity to the author of the thread, based only on their own experience and is purely informative in nature to questions posed in the discussion topics, questions from interested users. I apologize for the volume of the text with respect...
40-rus
And the water it will not darken the contemporary ?
care for a polished shelf is simple:
www.romanmers.com/questio...myit-polirovannyie-diski/
also interested in this issue, I have palerno the rim, and over time it began to look worse than the old unpolished
Not very as it is evident that polished. Not visible until you look closely. Underestimate the diameter of the disks)
I better than anyone knows how to look completely polished disc
(see my avatar:)
the wish of the client - the law
you're right
because my painters mixed with aluminum dust in a certain proportion
to obtain the exact inclusions of the metallic
The only disadvantage of polymer paint is its poor color. This color is "silver" to name well in any way it is impossible. More suitable for "light gray". He was faced with such a problem in the city. All painting take the polymer from the same Turkish "hole".
I better than anyone knows how to look completely polished disc
(see my avatar:)
the wish of the client - the law
So that the cutter exactly follows the shape of the shelves? CNC or a keen eye and a steady hand Turner?
you mean completely polished?
Yes
possible
look at my avatar:)
this is a fully polished disk
details in PM
Is it possible to do all the disk in the chrome? what do you need? and what is the process? very interested!