Polishing Kant shelves 19\\u0026quot; BBS
What to do if Your disks were last year painted polymer but they had the luck to meet several times with a kerb (curb edge)?
Not much, but noticeable:
Paint not podmazhesh.
It is not our method.
Our method is to apply the skills in polishing even the monobloc drive.
Vadim approached me with the desire to eliminate bordure and Polish edging his shelves of disks, visually adding to the 19" (under the giant calipers) discs.
Degrease the shelf drive.
Sizing border future polishing masking tape:
Protecive paint and 0.2 mm of metal from the front of the edges and grind the surface already on the machine on rotation of up to 600 grain on the foam (You know, I do not rise above):
this is followed by polishing all the already known method:
Remove the masking tape.
Of course, the end of the polymer with a thickness of 0.5 mm is visible when viewed under a microscope:)
But how much is it updated discs!
Was lucky enough to get a photo of the discs on the car:)
Your wheels can also change the look of the car!
you can on the knee
grinder and flap around
it all depends on your desire and accuracy
depending on the depth of damage
ranging from sandpaper (in the case of small kotska)
and ending with the welding of aluminum in argon environment (in the case of deep damage) and groove cutter
Hello, and than you shoot the very Bandurko? on the machine cutter? or is there some device that can manually overwrite the bruising? Thank you.
well, then Yes.
Although I doubt that Zazerkalie slips more than a full cycle of the polymer coating)
what do you say to the fact that this work was more expensive than sandblasting and painting polymer again?
did not guess the motives of the master disks:)
so the wheels seem bigger in my opinion steel. Black even like that are lost on the car.
I would like to say thank you for the video with all of you! This is a super motivation☝🏻 this👌🏻! Nice to hear an intelligent man with such a wealth of knowledge
RomanMers
right
stainless trim also suffers from the curb
Maybe there's accidentally a photo disc without a protective stainless lining? I stand graphite by car from lustrous only this fucking protective edging around the circle drive... you Want remove them all to hell, but can't figure out, under them there are grooves or not? Thank you!
I think they are and can be coated with varnish, so as not oxidized, with them it is not a problem, the varnish is probably a rip off if the curb is hooked.
A good solution polishing for the rings, but they are of such thin metal, just touched with them, and nothing will make, and these rings can be "in the furnace".
Steel similar to the model of BBS, which with chrome rings pads on the rim of the disk. Definitely better than just black.
RomanMers
nope
weighed
Guide for fun analysis, You have so many useful records, for as You have so many disks is "difficult" to many weight disks would be interesting I think.
RomanMers
Yes
very light
You didn't weigh? Do not perform such analysis when working?
The car is good, wheels-good to good...but...the chariot...
Size of course matters.
But...in addition to a long play value and the thickness.
In this case, long abundant, but the thickness-enough to swear.
Beautiful work, and one photo of a car with the wheels done in Korostyshiv on Gran car era)
in the case bordure polished shelf easy to Polish
and whether it is under the varnish?
polishing kit my
4 years use it:
www.romanmers.com/prodam/nabor/
care of polished surface simple:
www.romanmers.com/questio...myit-polirovannyie-diski/
I have two questions, what kind of paste is taken for polishing, and as a protected disc metal oxides from?
instagram or something distorted colors at the request of the owner. change as such is not particularly expressed :( question... how exactly was the tape sanding?
Nice polished edge, the BBS rims in the original invoice comes with this interchangeable ring made of stainless steel, which is called the Rim Protector and costs 60€/piece