Black MAT. AE92 Levin. # 2 - Toyota Corolla Levin, 2.0 L, 1989

As mentioned earlier, I bought the materials and started preparing. Of course, these are not all materials, but with the help of these I made thresholds.

The hood should be replaced altogether, but so far it is not there and I decided to do it. It was very crooked and once beaten. There were a lot of KGs on it. But the most interesting thing is that I practically did not putty it, but just wiped off the old spatula and the hood became even :)

Then came the rapids. One is broken in half, the other with a large hole. I bought a kit (resin, glass mat, hardener).

This was my first experience with glass mat and resin. :)


Putty it, it turned out very well.

Tackled the right side. Everything was blurred, the front wing remained problematic.

Right threshold. I cut out the extra pieces with a grinder, sealed it with aluminum tape, after the fiber and resin.


He took off all the moldings. In addition to the rear one, since in order to remove it, you need to disassemble the floor of the cabin. It was decided to close it up neatly.


Having put one headlight, at night we went to another garage, where they were supposed to paint. (I painted 2 times at most and then small parts)





Another trunk with holes. :) now they are gone.


While doing small things I had to go as it is. ) without handles and right mirror.