промывка форÑунок — Toyota Carina ED, 2.0 л., 1995 года на DRIVE2
The car at idle twitched a little, and when it was in gear with the brake engaged, it happened that the revolutions jumped from 500 to 1000 and then, if you did not press the gas, the car stalled. Last weekend, due to a small nuisance, the car got into diagnostics, which I had been going to for more than a month, there, after the diagnostics, they said that the nozzles were terribly clogged, most likely they would not be washed at the stand, well, the candles had to be changed, and it was understandably passed on them about 15 thousand. I decided not to postpone for a long time and signed up for them, having previously bought NGK candles and a fuel filter. Washed with removal, the machine was ready after 3 hours, when I drove out from there, it was impossible to recognize the idle speed a little more than 500 works smoothly, but how did it go!
The only thing they told me for a hundred is that perhaps the lambda probe is dying, although he says that sometimes without it the flow rate is less than with the working one, can someone tell me whether it is worth changing or not?
It depends on what kind of lambda has died ... If the front one, before the catalytic converter, it is better to change, put from 2110, and not take a steam bath ... But if the rear one, after the catalytic converter, then the topic is more complicated ... Then there are 2 ways, either lambda, or Pest's catalytic converter! With the latter - it is worse ... It is necessary to knock out the honeycomb, and put a "snag" ... Changing to a new catalyst is very expensive. Although ... We must look.
haahh))))) on edehaha karon karolah! those years!)))) 1 lambda))))) in front of the soyte cattle! change lambda 1000pudof if it does not work! consumption of 1.5-2l will increase ... because on a buggy or not working lambda comp years benz on an emergency program !,. there can be a failure in the region of 3000-4000 thousand ob!