The varnish on the shelf or open polishing? The pros and cons.
Friends!
Answering many times the same question:
"And discs certainly are oxidized without lacquer coating polished surface?"
Knew it was time to give EVERYONE their own view, and not only, issue.
I must say - I am a supporter of OPEN polishing, without any varnish.
And I have experienced a justification for my preferences.
Share with You the results of weighing:)
Want to see the advantages of the coating of lacquer (specific, because not all paints are kept on a smooth polished surface) of the polymer, for example:
1. The polished surface is protected from the external environment (water, touchless car wash, salt).
2. ... can't find a second item:)
Now the drawbacks (in my vision) (opinion of the author may not coincide with the opinions of others):
1. A significant reduction in the reflectivity of the previously polished and powder coated surface:
Shagreen, characteristic of the polymer takes place, the mirror is not very clear, but satisfactory:
2. Polymer varnish is not an absolute armor, and in the case of paint damage caused by stones or tool on the tire, also underneath the seats of kozek there is formed a cavity and the surface begins to corrode.
3. Difficult level of renovation (low maintainability).
In the case kotska (any difficulty) and repair disk shelves, coated with a polymer varnish that can make the car owner?
-to put on the car the spare tire
-remove the rubber disk
-disassemble the drive, perform the depressurization
-rinse polymer varnish (buying specilaty)
-make damage (if strong) or you can sand and buff out the smearing (in the case of weak damage)
-re-apply the powder lacquer in the company that performs this service)
-assemble collapsible disc
-sealed drive
-a day after sealing, wear a rubber
-put the wheel on the car.
How much time will it take?
"A week! No less!" (C)
Do not perform repairs when bully shelf, I do not see as an option in principle!
After all, we're all aesthetes!:)
Now consider the shortcomings of the (seemingly many) open the polished surface:
1. Care needs to maintain a constant gloss shelves.
And that means time.
My operating experience for the past 4 seasons (including this one) drive partially or completely polished, allows me to state that the time to vacuum the car immediately after washing with regular shampoo is enough for wiping the polished shelves of public funds for polishing (Doktor Wax, for example).
And is this process as much as 20 min.
2. The exception operation of the polished disks in the winter.
Salts from cloudy shelf for the day.
3. For tire I constantly remind the guys, "not mazyte polished surface with your hands!"
The less we touch the polished shelf (except cleaning), the cleaner polishing remains.
Now about the MERITS of open shelves or polished drive:)
"And then Ostap suffered!" (C) :)
1. Absolutely amazing for its mirrored and reflective properties Shine of pure polished surface.
I'm testing a tape measure to determine the purity of the mirror.
Whether it's a monoblock (not collapsible disc):
Or whether it is a polished collapsible shelf drives:
Without any varnish the desired reflection of the transmitted maximum:
But this is HAPPINESS!
2. High maintainability polished shelves.
This means that to perform the repair shelf at Kock on the curb in much faster repair lacquered shelves.
If tuff is light, without removing the rubber and wheels directly on the machine I can sand the damage up to 600 grain and Polish to your recipe.
This repair took me 30 minutes.
In the case of serious injuries requiring navarivanija aluminum in an argon environment, I did NOT perform the procedure for removing and applying varnish on the shelf (because of its absence), and once polished the seam and polished it with his set.
By the way, not performing analysis and depressurization!
Such repair deep badass I perform for 4 hours, including the tire.
That's what I call HIGH MAINTAINABILITY polished open shelves.
By the way, all my cars in certain periods were completely or partially polished rims:
Agree, note You are still paying their favourites:)
So take it even just for the sake of Your drives have become really DISKS!
Be brave in choosing the polished shelves!
I can tell you, having experience for more than three years on polishing discs.
All success and inimitable appearance of their horses:)
Your RomanMers.
PS About chrome shelf generally keep quiet!
Although no!
About how running "easy" removal of chromium from the shelves expect in the next entries!
RomanMers
be sure to deal you, too, bro.
:)
well, or through the new post:)
Shaw, I do not write back ))) phone damn
Fig knows ! The drive to remove it is not HO ! )) it was necessary to do in the winter, and I'm not there ))
Very interesting and entertaining information Rum ! Varnish disks — shit ! Shit I myself drive hooked . But hands do not reach to do it ))) sorry not in Kiev ... Because who to trust PEEN drive in Kharkov ...XS ((
Stainless steel))some offices do shelves Neri who do not care for the environment and borders)
Odess-it
In addition to fork, buy reginox, to combine the advantages of the polishing and varnishing+do not destroy the shelf))
what is ratinox?
There is such a thing, they are about 2.5 times heavier than aluminium)) and true shelves weigh as much as a asteroid, but here everyone chooses for himself what he prefer))
Odess-it
In addition to fork, buy reginox, to combine the advantages of the polishing and varnishing+do not destroy the shelf))
Reginox power!) Just not in your case) Your disk is of such width will weigh approximately 30kg without rubber)))
Odess-it
In addition to fork, buy reginox, to combine the advantages of the polishing and varnishing+do not destroy the shelf))
reginox=force
here I agree!
In addition to fork, buy reginox, to combine the advantages of the polishing and varnishing+do not destroy the shelf))
RomanMers
1.the aluminum shelf is not applied to our facilities chrome
2. it is going to do in the event of damage to a chrome shelf on the curb?
(on this subject soon and will also record for me)
Rum, and what it means for our facilities?
1. It's time to master this process myself :)
2. Same that damage to lacquered shelves. Gemorno, I agree :)
1.the aluminum shelf is not applied to our facilities chrome
2. it is going to do in the event of damage to a chrome shelf on the curb?
(on this subject soon and will also record for me)
What if the polished surface to cover the chrome?
The idea is that the mirror properties are the same as in open polishing.
And the durability will be like lakirovanie surface.
If I'm wrong, please correct.
How do you know how many people and the same opinions. There is 6 colors, I will not convince and that is free advertising and have done so.
not even imagine such a case for example on the disc:
c-a.d-cd.net/34e5ae2s-960.jpg
especially followingkey:)
Well from hitting the wall too, the film will not save it but glue some small pebbles
Eternal engine is still nobody managed to invent!
this thin rubber protects from hitting the curb?
this problems rather just covering the scratches on the disk
no more
RomanMers
from the curb I will not protect
and here is the point about the maintainability of such a shelf:)
From the curb there are pads on the wheel are OK 5000 set dial Moscow tampira .
Instead doctors try to wax sealant for drives purpose . I told them my husband and the price is 1500 no more in the Bank but enough for 2 years exactly
met a lot of scratched discs with standard tires
rubber is not a panacea for border
distance is a panacea:)
Well, from the curb the tires it is necessary normal to take, with built-in protection from rubbing to the edges) I personally for 11 years, never Tirano))
from the curb I will not protect
and here is the point about the maintainability of such a shelf:)
well, judging by the advertising, the application of ceramics in about 5 layers to protect from falling rock at the speed of ~130 km / h) on the matter XS... people in General like)
but from the chemistry on the road for sure protect) one man machine that is stupidly Wilson washes without chemicals now, just Karcher)
But if stupid how or whether ceramic Pro coating without nail Polish? Or liquid glass?
I go to her for a long time, but as evil prevent permanent kataklizmy in the country(and this is reflected in the financial side--I mean free money on toys)
many pics watch, "may"shki-what-they it is the worst(even my dream-not collapsible)for the Mersey is Kannon drives(my opinion)
Good review comparison, luster demands attention and there is no varnish won't, except temporarily. Chrome and probably fun to shoot, quick to anneal), BUT! drives in no case heat transactions above 200 deg to subject impossible. And chuhat it very funny)
Romk, people here really want to wax once and so that would truservices from the glare on the pavement. And then — the grass does not grow on moecke water passed — and again eats away the retina. So people think, cover the layers of mega armor and that would be sturdy and prozrachnogo. Lazy people. Until I realized that it is necessary every time a beauty Polish. For dims.
And it's okay if shelves, and who is the infidel bbs RS and their ilk — polishing in a circle, while the latter made the first Shine lost.
I realized this long ago and decided that polishing is not my alter ego. Paint the wheels and then water. And that's all.
And bordure... Woe to sanseru that the Parking is not trained in Shoe Yes gourmet Yes nenopietnas.
Well, or stainless steel, to heighten the sorrow of the drivers.
RomanMers
Yes
in the winter I do not recommend to use them
only 8месяцев of the year
eight months of the year is very nice))) we have in the North the snow is still/is, a couple of months will be summer, and in October it looked like snow again will go)))
Faced this winter with the problem of the polished shelves, the week they got Karasyova, it was a pity to look at your work
The removal of chromium is of course coapec ... I've decided that you need to pump your skill and remove the mechanical drives with chrome центров19х not collapsible. Well what can I say, will soon begin sanding and polishing))
Dr. wax is a paste for polishing
she's not protective
but RUB it in her best
and let's just
not a lot
Dr. Wachs n disks поч4му it works.
palerno has roof rails, then walked doctorwatson, he supposed, when you RUB it darkens and by entering into reaction, and the drives and remains white as not three. That is, to protect the metal he probably will not be?
any polishing is preceded by grinding
when you grind the surface to a smooth aluminum
then Polish quickly
I have the entire disk covered with lacquer, many chips from stones, so as to Polish them, lacquer lot of rikvin, the impression as if the spray paint (at first I thought so), got accustomed, and it is chipped
We have 9 months of winter)))
I have. Drives chrome and it bloomed. I want to get him and you advise him to do?
outdoor aluminium is oxidized from the reactants
in the winter the polished rims nobody exploits
for the winter - the second set
is this normal
and the other 9 months of the year - please:)
I understand you disks do not varnish in the summer. And as the winter?
To cover so and so?
They probably makes sense to cover some supper durable varnish thicker?
Otherwise, stick th XS there rubbing I duiayu
But if the spoke wheels?
So I took them apart, Palermo, collected and then how to polirovat after washes?
Than how to crawl than polished?
The ride will be summer only weekend car.and how often will it need to be polished?
Thank you
I'm no cover polished rims
here are the arguments:
www.romanmers.com/lak-na-...ya-polirovka-za-i-protiv/
but if you need
the polymer lacquer coating is possible
with all the consequences
Good afternoon. Want to Polish your wheels. The machine is not glamorous, off-road, especially mirror finish is not needed. In the swamp agree well, but sometimes, so I want to varnish. Prompt, pliz, what paint and where it can be done. Thank you
Right
Can be oxidized
Because:
Sink polished disks:
www.romanmers.com/questio...myit-polirovannyie-diski/