INSTRUCTIONS FOR DISCONNECTING ANTIBUX! - Toyota Aurion, 3.5L, 2007
On the advice of teammates :) for Toyota
Who cares to do the following:
1. Make sure the car is in the Parkign and the parking brake is released before you start.
2. Switch on the ignition (Start the engine).
3. Apply the handbrake.
4. Fully depress the brake pedal and then release.
5. Fully depress the brake pedal and then release.
6. Remove from the hand brake.
7. Fully depress and hold the brake pedal.
8. Apply and remove the handbrake (the brake pedal is depressed).
9. Apply and remove the handbrake (the brake pedal is depressed).
10. Release the brake pedal.
11. Put on the handbrake.
12. Fully depress the brake pedal and then release.
13. Fully press the brake pedal and then release
The procedure is considered to be successfully completed when the icon for disabling these systems lights up on the instrument panel (car on slippery road).
do not last, after stopping (drowning out) the dvmgatel, everything comes to normal :) and then again everything from the beginning
Touota have many such combinations for different things ... oh, where can I get a printout of everything, well, or the most necessary =)
I somehow took off the lambdazond and I tried it without antibuks at -2 in the night city - SCARY POWER! in some situations, it’s even good that the slip was turned off, it fits perfectly into turns at 90 km / h!
Tried) The car goes easier)
In winter, you need to accelerate from the intersection, and she does not stupid))))
Yes, and on dry asphalt it is excellent)