Working with vinyl - Toyota Corolla, 1.6L, 2006
After, inadequate, our winter, the film shrank a little and irregularities in the form of bubbles and other x-no formed. I took off all the linings and started to scoff at them at home)) at first I just wanted to fill everything with varnish ... it turned out not ice, I had to re-tighten the upper side covers of the console, and I rolled the fresh film into varnish). I just stretched the film on the lower ones to an even state) I also pulled the gearbox frame, in winter it did not work out very well, but now everything turned out neatly and coolly enough) here are the pictures)
before it was a little embarrassing to take a picture close))
I rubbed the dust with my finger))
well, along the way, a few pictures with tumanki and disks
so the varnish is transparent, on top of the film. you can not get dirty and give it for painting
Yes, I'm sure. Last time I inserted everything during frosts, but I need to keep the vinyl warm for several decks, and for the first time I worked with the film ((