Exhaust repaired - Toyota Camry, 1.8L, 1998
Continuing the theme with noise
www.drive2.ru/cars/toyota...rnal/4062246863888334132/
Everything became apparent after the car was lifted and looked from below. Diagnosis - corrugation burned out at the very beginning of the exhaust pipe.
What's the funniest thing is that the engine already had some kind of noise after the purchase, but then they reassured me that the engine itself was noisy, so some kind of burnout was probably already then, now the engine in the cabin is almost inaudible even at 3K rpm!
in general, I'm happy =)
raised
unscrewed part of the pipe
from here
bigger
heh, and here are the polyurethane rubber bands, which I changed in the fall (yellow on the right)
here he is the hero of the occasion
do not look or the retina will peel off!
when everything was set, the master asked to get into the car and pedal not yet allowed poke a box from D to R, like everything is ok
under the ceiling
For example, for example, sounds had nothing to do with the muffler, but
if you already hurt them for something, then it is quite possible that he also suffered,
and this is no longer 3 thousand =)
Yes, I'm just kidding) repairing the muffler is in the order of the queue) not only does it make such a sound, there it is still almost dragging along the floor, well, on the rails and bumps I touch, so the main task is not to lose it)
you will not emit the sound of a farting 30-year-old pelvis, it doesn’t look like a racing one, unless of course you have an appropriate exhaust!
Thinking about my sprinter?)) I'm flattering =) what is it, three thousand and I will not make the sound of a racing car? =)))
by the way, I wrote and thought about your sprinter))
the engine itself cannot make such a sound, because it is closed,
and all its parts rotate in oil, so this is 100% exhaust
1.5 rubles corrugation itself + drain is work
I also have some kind of problem with the exhaust pipe or muffler, it makes a sound like a racing car)
no, there is nothing to vibrate! maybe engine mountings, you need to look, go to the lift
Hello ! I seem to have a similar problem only accompanied by vibration. Did you have vibration with a faulty corrugation?