Front brakes with ZhT-Handicap) - Toyota Caldina, 2.0 l., 1995

Oh eptit-) Nishutya tak. With disks need pictures. It looks menacing. Tomorrow is 5! It's a pity I just reduced it. it would be better if there were more.

The springs of the same company, the racks are pumped, very rigid), at the back with racks they also made)

And here the springs are not the same as in the back and the struts are new?

r0m1r3z

everything fell a bolt or was it being altered? describe in more detail pliz. There was also an idea to put brakes from the seeder. Kaldinovsky racks?

You reduce the disc by 12 mm in diameter and everything rises like a native)

lm776

The car is probably preparing for the installation of 3S-GTE

3S-GTE will be, but so far everything depends on finances)

I do not feel that either, there is simply nothing to compare with! And my husband drives his brother's Vista from time to time and then he laments all the time - we have no brakes!)))

No, I just really felt it when I put the wheels on 16 ". At 14" it was not felt at all.

They don't really put in everyone!)

Yes, there are plans for 3S-GTE and Hell, to be honest, my native brakes do not really fit me.

The car is probably preparing for the installation of 3S-GTE

there everything fits only here the caliper mounts relative to the brake disc we have different than the seeder,
so the brake disc is grinded to the desired size
. ; D

everything fell a bolt or was it being altered? describe in more detail pliz. There was also an idea to put brakes from the seeder. Kaldinovsky racks?

Interestingly, I would like more details.

Sometimes it is cheaper) and sometimes it is more expensive)

Sooooo cheap took!

oh you, I thought the whole ...

here) and I took the current before)

yes per set

20 for a set (pre + back)
?

I have not seen cheaper than 20)

There is only a little left - to take money somewhere)

excellent brakes, well, now we need to put the motor into a head start :)

Yes, it's a common problem

yes, now at least 16)

these brakes are only for 16th wheels?

but what about the sensations? ))))

Some incomprehensible sensations))))

Excellent brakes. I drive them and I'm very happy.

just grinded, no spacers needed)

installation question, did you just grind off a little disc diameter? Didn't you do the spacer between the caliper and the hub? I also put such brakes)) we have one-on-one front suspensions, that's why I'm interested!

The brakes are great, just a dream.

Ok, thanks :))

you understand correctly))

and the diameter was grinded so that there would be nothing more not to change or what? as I understand it?