New house for carpc (Part 2) - Toyota Celica, 2002
and so we continue ...
apply fiberglass with epoxy resin
align the second layer with plexiglass
remove all unnecessary
paint the insides
damn how the fotik shitty transfers ((
when everything froze with us, it was time to take care of the carpet
we glue it on both sides, top and right ... do not touch the left side yet, because this plastic will still have to be crumbled when installing the spacer ... the pressing part of the carpet is glued as a temporary measure only along the edge of the window ...
it's time to start installing the components ...
and this is my sound card, which will actually sing)) this is esi waveterminal 192m
well, we install our stealth in its rightful place ...
it remains to remove the protective polyethylene from the plexiglass and voila!
from the frequent twisting-unscrewing of the plexiglass, the seat of the self-tapping screw in the fiberglass-mounting foam broke ... it will be necessary to stick a dowel there ...
Now it is necessary to vacuum it, since the carpet lay in the garage for a very long time ...
I will put a spacer soon, stay tuned ...
Well, this is me of course so, figuratively wrote the temperature :) we have such sometimes) well, now I will also do carpc myself. thanks for the info! :)
nirazu at -35 did not try to start it because there are no such temperatures here)) a couple of times because of the frost I did not get it ... but it took 5 minutes to warm up the interior and everything was buzzing ...
the hard disk is installed on a laptop, since 3.5 "began to malfunction from bumps ... all the
same, they are more prone to vibrations ... there were never any troubles from the sub, the flight was normal -)
vibration from the sub will not affect the propeller?) I've already read about the second karpis, everything is awesome :) but the hard one puts me on my guard, or rather his vital abilities on our roads.
hmm! also interested in the moment of shaking on the bumps!
and there is a desire to collect carpc for myself :)
BUT I have a radio tape recorder worth the pioneer AVIC F900BT :) in fact, this is already a weak computer with Windows CE :)
so on the amp, it seems, there is no 3.5mm input or you have a special sound card?) I
see!
It's just that not all monitors (small) have a vga cable, usually a tulip (or whatever it is called)
vsmysle as a sound? .. from zvukovuhi to amps
b / n specialized for carpis
to the monitor? ))) vga cable as else)