A little about the rear bumper - Toyota Corolla, 1.6 liter, 2008

After work, hammering his head with thoughts of conquering the planet, he got into the car, started, warmed up, turned on the reverse speed, clutch / gas ... But he didn't look in the mirror ... but just there, like an evil, Terrano is parked ... the end result is a hole in the bumper. I traveled with this additional hole all winter and spring. In the summer I went to see friends in Adler. Upon arrival in the south, I discovered a wonderful thing; My friend Artem rents a paint brushes, and I will be able to rest and work out with my cow, and besides, Artem offered his all possible help. Removed the hole in the bumper with a hot air gun, pocket knife and hammer. A broken bumper from the Prado and a thin mesh for reinforcement went to consumables.
The paint in the area of ​​smelting works was cleaned off with a knife, strips 5-7 mm wide were cut from the Prado bamner and cleaned of paint, Then the bumper and the strip are heated with a hair dryer to a semi-liquid state so that the strip fuses with the bumper, and then we level it all with a knife. We carry out all work from both sides. Katafoy cleaned about the same. I cut out the inserts, into the holes so as to close everything and apply less putty. And everything in a new way, polished, cleaned, warmed up, straightened. Sorry phot a little ...