Serrated washers - Toyota Land Cruiser Prado, 2.7L, 2007

that's down in general. and water saving

I have put such nozzles on the last 2 of my cars. I will get to the grace too. But it’s really something off the topic of "peeing" from my relatives

I don’t know they seem to fit all Toyota

thank you, yes, the flag is still with murano, there is no smell, but I bought it not for smell

from 40k nozzles ?!

the flag looks beautiful

oh thanks for the info =) otherwise I would have bought it =)) on my head, I will continue to look =)

on Mears IMHO the size of the small will definitely not go. there is more hole on the Mercedes. I know filmed cleaned

in principle, not very expensive, you need to look with us =) maybe they will suit me =)

3000tg steam

and how much do such nozzles cost?

pzhl and if from kunaev then right to the end and to the left.

Thank you, I won't get lost now =)

so it turns out if you enter from Valikhanov, there is such a transition in the building, to the left after what a cool boutique, the continuation of the tulpar. and right there will be a Toyota boutique

where exactly can't you tell me? or you can see it there, maybe it glows =)))

or so a guy sits in a tulpar, he has it.

I'll take off my own, I'll go with a sample =) if there's a bigger hole in the hood I'll make: D

yes it is necessary to meet to remove and try on how the thread will probably go. dshrb are all round, but not with Subaru? I have not seen universal ones. but I know what I bought is suitable for Pajerons. should come up to Subaru.

I wonder
if they will stand up to me: D are there universal ones, you need to look, tired of the pussies = (((and with fanned ones the water consumption is less, less often you will have to fill in =)

yes, you have to think ...

on the G500 2008 are not fanned? can remove from there? and I remembered everything on the Lupariks the washers are hidden. I had a murano under the hood, or it won't fit with a new one, I think you can think of a thread

Yes, the West is good too, it's a pity there is no such device for Merci ... = (

what for?

AK-90

yes, 5 minutes, you just need to make a hole in the seal frame and that's it

Will you have to drill the door?

Will you have to drill the door?

yes, 5 minutes, you just need to make a hole in the seal frame and that's it

excellent thank you!
How long will it take to install?

pzhl, there is a guy Zhenya, he sits, the numbers if necessary, then here are the Seals on the doors 67895-60010 and 67896-60010 . right and left

thanks for the info.

also a dealer of spare parts of the TSP type, located next to Tulpar along Valikhanov

and what is ATS?))

the TSP is expensive. better order in CAP

oops ... not bad. as you find it, let me know) I will be grateful.
there will be time, I'll go to TSP and find out.

on the GX470, a seal is placed between the doors, so that when the door is opened it is clean. everyone at the pradoclub in russia ponaftkali them, so I also think to put myself.

and what does it affect and what does it look like?

pzhl by the way I'm here with GX one nice mod also found. the seal between the doors, on the GX470 it is not on the Prado. so I'll put myself

I put ... a very nice little thing.
thanks for the info;)