Completed 3D Carbon trim - Toyota Avensis, 1.8 L, 2008
Yesterday I laid out the rough version, and today I finished the finishing one and finally made the cover of the central glove compartment ...
posted the rules of the pictures ...
added one more change - pulled the gearshift head into carbon too =)))
initially I wanted to do everything with a film for chiseled metal, but it was waiting for about 2 months and it was decided to do everything in silver carbon, which began to please me when I arrived, and then on products ...
in life it looks just wonderful, I did not like all the dark shades of carbon fiber in life, my soul does not lie for Black =)
Thank you =) I will teach you without any problems =) the most zapara is to disassemble the machine, but it is not tricky to glue this thing, especially carbon is not very whimsical ... unlike the tint film for headlights ...
how the machine looks now I like Pts =))) now, for my taste, everything is in the subject, and I basically didn't want to paste over the other elements ...
Cool, the eyeglass box is of course a controversial option, but the main thing is what would happen to you)
I like full-fledged yellow harmony =)
everything in the cabin is yellow and it seems to suit me =)
Thank you =)))) the handle is peeling off, so I decided to tighten it too. Moreover, the plastic was removed from the 1st bolt without any problems ...
Normalek fulfilled my wishes about the box handle! Marked with the highest performance! Well done!
I ordered on go-shop.ru ... from Moscow to Penza they delivered the 1st time in 2 weeks, when I ordered the 2nd time. delivered in 3 days ... but it depends on the work of the mail, the site itself works very quickly!
but to stick it yourself and to your taste there are almost no problems =)
spasib =) I don't know yet what will happen to the money, but in general I am planning a black roof. new grille and summer wheels standards ...
I ordered 26 rubles per 1cm of a roll, a roll 152cm wide ... well, plus shipping more ... differences in the manufacturer's company and in the width of the roll ...
and which one did you order?
the range of prices is from 15-30 to 700 rubles, to read what is the difference ...
Well done! But I think for completeness it was necessary not only the lid, but also the frame around it too! And the head! Then the center of the panel will be completely!
there was one nasty one, now he died =))) and everything is exactly ... on the steering wheel I'll drag it a little later, now there is no time ... I think I'll have to disassemble the steering wheel, because I don’t like how it came out ... but in general on the wooden inserts, the gear knob and the glove compartment everything is ok ...
Thank you =))) now there is carbon and red and blue and even green ... live, this trim is very pleasing to the eye, and not Stokowski wood ...
The panel itself has become much better, somehow more modern. But the steering wheel and the cover on the top of the panel, I would not touch.
I was counted in the autostyle, I quote, "for about all this we will take 5.5 rubles, but maybe more expensive if difficulties arise" ... they would have had more difficulties with the upper glove compartment, I was smart to remove it for 2 hours ... it all worked out for me at 1.8 about, maybe a little cheaper =)
bought and buy to all my friends on the site go-shop.ru, tk. more people, the discount is accumulated faster for everyone =))) it is easy to glue on small parts, you only need a construction hairdryer, and it will turn out 3-4 times cheaper than in any Penza atelier ...
it is intended for the body ... but because of our sand on the roads and salt, by the spring you will not have chrome, but beaten foil =)))) such a coating is made by cars that are either summer or as a spare car ... try to cut the bumper and ride the rest of the winter with him and you will see the effect =)
DemseR
3000 RUR No company will stick it to you in Penza ... they have 0 experience in working with it! and it is not an option to ride such a wheelbarrow in winter ... the end of the film will be in 1-2 seasons ...
and why the end will come to it, it is not intended for the body? Or do you mean to glue on dry and not on wet?
3000 RUR No company will stick it to you in Penza ... they have 0 experience in working with it! and it is not an option to ride such a wheelbarrow in winter ... the end of the film will be in 1-2 seasons ...
hmm, car styling just kills with its prices to be honest ... when I was with them, they called the price of 5 rubles for my big one ... right now they'll probably say 7 =)))
DemseR
More so =)) to glue one spit! the main thing is that the surface of the norms is not matte! I buy in one store on the internet, very satisfied with the service, prices and quality of the goods! 5 of my friends have already bought from Penza through me!
if you decide, I can order you both, it comes in about a week by cash on delivery. you pick it up with me by mail, it doesn't work for me, it's simple when the amount is reached, there will be a discount for everyone =)
In Penza, film is not sold anywhere, as far as I know ... and if there is in the technocolor, there is x ... I
How to glue if I explain anything =)
Hello! And my friend is me =) Thanks for the 3D carbon! I tried to glue the phone cover to myself, where the flat surface is stuck very cool, you can't tear it off, and where the corners are, it doesn't stick (= there are roundings, I couldn't pull stronger, perhaps there with an overlap it was necessary, but the lid would not close.
In short, the first pancake is lumpy =) I want to tighten the mirrors for myself. And I understand you very well, I went to Autostyle, they ask for 2 rubles for two mirrors. For a beard separately I ask how much the roof will be in gloss to tighten, the price is called from the bulldozer! 5, not 5.5! Then I thought, he said, it won't be 6 rubles =) I'm crazy. In general, I'm in prostration right now =)
Thank you! It remains to decide on the color) Half a meter will cost 1200 rubles. about?
More so =)) to glue one spit! the main thing is that the surface of the norms is not matte! I buy in one store on the internet, very satisfied with the service, prices and quality of the goods! 5 of my friends have already bought from Penza through me!
if you decide, I can order you both, it comes in about a week by cash on delivery. you pick it up with me by mail, it doesn't work for me, it's simple when the amount is reached, there will be a discount for everyone =)
In Penza, film is not sold anywhere, as far as I know ... and if there is in the technocolor, there is x ... I
How to glue if I explain anything =)
When I went to Volgograd, I ripped off the titanium-like inserts in the cabin in two places with a wire from the navigator = (
Now I'm thinking of tightening them into a carbon-like film ...
I can remove these inserts myself without any problems, I'll find a construction hairdryer, the only problem is with buying the film itself ... In Penza , as I understand, is it expensive to buy? Is it much cheaper on the Internet? I just haven't been interested in the range of prices yet ... My friend still wants to buy.
Isn't it difficult to glue at all?)
Great you did it!
not everything is there ... but if you write them down, I think they will help you and tell you everything about the films!
Does matte dark gray happen at all? You threw me a link where you order, I didn’t find something there!
on your typewriter about 18-20 meters, it is better to take 15 meters, and then buy more for what will not be enough ... the price may be different, depending on the film, its quality, the name of the manufacturer ... a running meter costs about 500 to 1000, that's count how much it will pour out to you ...
DemseR
I won't tell you, he's old already =)
I have such a thought today for the future (for the summer) to cover the car with a matte film. How many meters of film do you need to cover the whole car? and how much will it cost you not tell? the film is gray, matte! ! !
old is good! ! ! means it works for a long time and does not break, you also need to buy yourself)))
I took it from a friend and have been using it for a year now =))) I will have to buy my own, it costs 1.5 rubles.
well, so I tried =))) the film is actually not so difficult to glue, observing symmetry ... now I removed the carbon and made it with chiseled aluminum, I like it more =)
Well done, cool glued, even the angle of the fibers is the same everywhere! How did you manage to achieve this symmetry?
without disassembling, but I will disassemble in the future to make aluminum perfectly!
Did you disassemble the steering wheel to glue it? Or glued it without disassembling it?
GurgenBanderas
Buddy, can you please tell me how the cover of the upper glove compartment is removed on Avik?
www.drive2.ru/l/7211900/
Thank you. And you probably need to snap them off from below - as if from inside the glove compartment? There are two holes in the bottom cover ... Should we act through them?
this crap is still the same =) it will be difficult to remove =) behind this cover there are two latches that need to be snapped off for a very long time and tediously, and before that unscrew a couple of bolts in front of the cover like ... that's the whole secret, I wish not to break the cover =) I have it intact I took off and put on 3 times, I was lucky that everything was in place =)
Buddy, can you please tell me how the cover of the upper glove compartment is removed on Avik?
Please tell us how you removed the top cover of the glove compartment, which is pasted over with carbon fiber.