Bought lenses for HandMade-a)) - Toyota Altezza, 2.0 l., 2003
In general, I always did not like what was shining to the right, the roadside was not visible, and the drivers were always blinded, the xenon pants were all the same ...
I figured out the second problem with the headlights down, but I decided to deal with the first problem seriously and for a long time, I bought one dorestyle headlamp for 300 rubles, and a set of modular optics from Reige Rover,
I will tinker, in the headlights, and at the same time I will make diode ang. eyes, because I'm tired of the fact that the ballasts are burning ...
Of course I want to make it not collectively and beautifully, but ideally I always wanted Spider lenses from Nissan Sima, or Infinity Q45
I posted new pictures of my Handmade))
By the way, even I didn’t like the idea with the notches, I’ll do something else, today I’m already thinking I’ll assemble the headlight)
Update, finally my hands came to finish something, I got bored with Chinese LEDs. burn like fluff in the sun (((as a result, half of the LEDs do not work ((
but shines stsuko)))
Everything Finally Farki finished just as he wanted)))) it turned out in the end like this
Comparison with headlight drain, stsuk sweats (((
The checkmark turned out to be very clear and bright))
Dimension made in Lens and Reflector
Well, a general view))
I think the current can leave the envelope purely in the Lens and remove it from the Distant ...
and something must be invented with eyes ... I
came up with))) LEDs!
Price tag: 7 700 ₽ Mileage: 83 400 km
I, too, for the time being for Rover, will look like Moder from the ShooTsu Forum
Spider eyes might not even be worth it? appearance in my opinion will go for the worse. And for the rover ++++
It will work, but so far only lenses from Ranger Rover, Q45 Spider Eyes cost $ 840 on ebay without shipping, too expensive for me ((
Damn, people who know where Mona Blends or Shroud to find on lenses? (((Otherwise the collective farm turns out ...
It is necessary to paint the plastic chrome body of the headlight with matte paint. The eyes give a lot of glare and it turns out it is not clear that these are eyes ...
It turned out great! I was always interested in this: the headlight was originally a reflex one? The lens module is not tricky to install, but it is much heavier than a plastic reflector! Do the standard guides on which the reflector and headlight range control rotate? Will he cut off these fastenings on the not very flat Russian roads?
perfect solution!
Are there many problems with regulation? will the lens be adjusted with standard rotors or otherwise?
Yes, everything will be regulated))) if I put on Restayl, then even the auto-corrector worked)))
There are no problems with them, the problem is stsuko with the hood that closes the inside of the headlight ...
I had lenses from the trade wind B 5, what do you think will fit into the headlight on Lexa IS 200 dorestayl?