Making a podium for Wuxi ... - Toyota Celica, 2.0 L, 1992
I have long wanted to deal with the wires in the trunk…
there are 3 amps in the car…
they are pretty simple. in the future, it will be necessary to replace it with one 5-channel or one 4-channel and mono-block ...
On the rear trims of the rear seats hung:
VCL for the rear speakers
VCL for the front lugs of the
crossovers ...
they slowly bent down the thin plywood base of the lining ... and all this began to acquire nondescript view ... and again a bunch of wires ... from the maf and the battery, the wires were laid as they lay on the red sides of the body. but in the trunk it all came together in one incomprehensible ugly bunch ... which was stupidly covered with a rug ... TIRED!
then everything is practically visible in the pictures ... I took plywood of about 0.5-07 mm as a blank ... I took a large piece of cardboard from which I cut out a stencil suitable for me ... I cut out
plywood along the stencil. cut holes for wires ... figured out how where what will be what. left room for the Conder, which will soon be brought ...
sheathed what was found at home)))) do not hit)) already bought leather-venil and synthetic winterizer. in the next. I will drag the weekend again ...
then I put this stand in the car and neatly laid the wires as much as possible separating the power and signal wires from each other ...
sobsno, that's what happened ...
Price tag: 180 ₽
do you think someone else does?
I do not - if there is little material and cannot be glued - it is better to leave it as it is
if you leave it as it is without the palette - I usually pull out the carpet where the treasure is! sometimes I increase the length by 10 percent :-) to
glue the inside - hemorrhagic just cut through a few arpet - skip the wires and let it be - you still can't see the "washcloth"
excellent ... tell me how to be ... here in this kind of my shelf. (0.7 cm thick) There are small rectangular holes below and above the amplifiers. about 1.5 by 3 cm in size. sobsno through them the wires to the amps and crossovers go ... if you look closely, then I just cut the carpet in these places ... because I don't know how to pull the carpet there and even attach it like that there (to get a rectangular still covered hole) ... it's not edges. there is no stock of material ... ((((
to make more holes? don't want to
I pull the box for the subs with the Carpet, make the false panels!
basically means yes! there is
ATP! .. judging by your profile, I suspect that you have something to do with such things ... there is only one question ...
do you have any experience of tying things up with a carpet? )
Carpet is a cool thing! but leatherette is more interesting :-)
vinyl - the film is finally not an option - it is necessary for everything to be perfect! - this happens rarely (Very) :-)
A friend did something similar yesterday ... pulled with a broom ... didn't like it ... 1: 0 in favor of the Carpet)))
It is logical! but alas, not very practical. in terms of dust, etc. and kozhveil wiped with a rag, sprinkled with jokker and here it is. shines and sparkles like new))