Spare wheel hatch in trunk - Toyota Corolla, 1.4 L, 1998
I decided to make a hatch for the spare wheel, otherwise a thick car was laid over the place where it lay, and if something was put in this place, then the polic fell through. It was necessary to fix it somehow.
I took an old car, cut a panel out of plywood according to its shape, measured where to make the hatch and cut it out. I did not measure it well and it turned out a hatch on the side. It is better to do it according to a model of paper or thin cauliflower, then everything will be smooth. I made a double cover, and fastened the halves with a piano loop, the frame and cover were also looped.
It turned out very well and the floor in the trunk became tough.