Audio system ... Revision. - Toyota Camry, 3.0L, 1994
There was a little trouble on my attack aircraft, the amplifier began to junk, the one that is responsible for the music. = (
Already twice I gave it to be repaired, but after a while the malfunction comes out again - the sound periodically disappears.
I got tired of this and decided to put something else, not only an amplifier, but also other acoustics.
The previous version of the system is located here:
www.drive2.ru/cars/toyota...4062246863888333452/#post
The head unit Alpine CDE-9880R left as in the previous version, recently completely replaced it, therefore it suits
Day. .Night
Good friends with a discount and installments fitted the digital amplifier Alpine PDX-5 ...
... and two pairs of Morel Dotech Ovation 6 speakers
Which I put on the front ...
... and the rear. In the photo above, the 6x9 speaker is the one that stood before, and under it what was put in place of it.
On the halfway.
The housings and grilles of the tweeters had to be painted gray to make them stand out from the interior.
Before.
... After ... The buzzer is not yet oriented in space as it should.
However, the system as a whole has not yet been tuned, but the sound is pleasing, volume and depth have appeared.
Since the amplifier is five-channel, in the future, and possibly in the near future, there will also be a sub. =)
What I had was also enough. At least I thought so =)
And I want to put a sub in order to unload the speakers a little. The sound will become even cleaner.
I'm tired of just waiting for a newer car, it's not a fact which is better =)
And if something happens, then the music can be removed and rearranged.
class, would love to check it out!
I love music, but I'm 4 to 50 in the car enough even without a subwoofer there
will be a newer car, I will definitely put there something good)
I respect Alpine and Morel, I have almost the same)
It is not easy to select acoustics for our body, the door needs a shallow installation depth.
I’m my family’s podiums to the dump =) It doesn’t sound on plastic. I muddied such a structure made of wood in the doorway, sorry I didn’t take a photo, but it’s not visible under the noise.
Soon I will post pictures)) behind the ovals stand through plywood spacers, and in the doorway the columns have already taken the place of relatives)
I don’t have standard films (I threw them away). When installing good acoustics, they are useless, in the sense that in some cases they can emit unpleasant sounds vibrating from certain frequencies (enter into resonance).
Unfortunately, I have no photos of how I reinforced the doors, because I did this even before I registered here
. But I suffered pretty much, nevertheless, the front part of the door is now a monolith. (The back of the door cannot be done this way, otherwise the door trim will not rise because of the pocket on it, and the door opening rods need space ).
Here you can see a little more how Shumka is made www.drive2.ru/cars/toyota...4062246863888333452/#post
So there would be a desire, but you can do almost everything =)
I have three types of pasted over the inside of the front panel of the doors - first, vibration is warm on it, and then with noise insulation. + Vibration isolation on the inside of the doors + noise insulation on the inside of the door trim.
By the way, there were a couple of side effects. the doors have become heavier, then the door latches can not always hold the door, but the second effect from the category of pleasant =) Doors close with a much more pleasant sound =)
On the good, no tweeters are needed for the rear, and it is advisable to pay maximum attention to the front acoustics. Noise isolation is required, it is not easy for us to make it, since the door is a large hole with a pair of crossbars. without it, even very bass speakers did not bass at all, and accordingly you will not have it :)
True, this is without standard films, maybe with them, it is somewhat better.