Catwalks - Toyota Starlet, 1.3 L, 1995
Manufacturing process. Immediately I apologize for the quality of the photos, I shot everything on my phone, and also, I did it myself, I did it for the first time, so don't judge strictly if something is not according to technology :)
So, we take off our pocket and, which is very important, we carefully put it in the trash bucket
We take plywood and figure out where and what we will have
For clarity, we immediately saw the rings and a frame for crosses and try on all this
Then we cut out the base of the podium, glue the rings, I glued on the poxipol, I chose the corners approximately by eye and you can try on the whole thing on the door trim
Then we ask our friends to take off their tights quickly or go to the store and buy. It is imperative to check for tension :)
Now we tighten them, it is better to do it together, otherwise tightening, arrows :) we do not need this
Two three layers of resin with fiberglass, I used a Novol repair kit, it took somewhere 4 jars for everything about everything
Then we take sandpaper and, as grandfather Lenin used to say: skins, skins and skins again. You should get something like this
And then they poured it all over me with liquid putty :)
Then we skin again, remove small jambs, if you drag them over, you can stop at this, but I decided to paint :(
Here you can see a little that the speakers are at different angles relative to each other.
In short, here
Price tag: 1 000 ₽
it turned out great =) but my 5 kilogram ones are not so easy to fix)) I have to be perverted)
I did everything myself, plywood, tights, resin, shpaklya, speakers for two 16s, soon I will start doing in racks with tweeters
I didn't want to post these photos at all, but okay, at the request of the workers ...
Well done, for the first time I'd say you did everything 200% well! respect!
Will you not cover the top with anything?
By the way, did you cut the casing of the front panel of the column? otherwise it is not visible in the pictures ...
well, glad that you liked it, I hope the information will somehow help, if you ask anything
I myself also want podiums, I thought about how to do it, I'm incredibly impressed with yours) exclusive after all!)
Thank you, well, I don’t know how much, well, perceptibly, the door is a large vibrika, and the podiums themselves were not easy. My door was already slightly sagging, the passenger door seems to hold on for now :) With tights, yes, one for each podium :)
and how heavy is the door? it turns out one leg of tights for one podium entirely, right? it turned out very cool.
He's just handsome, now I can't sleep well! but I'm not sure that I will get at least something similar ... (
Yes, I already put a tweeter on my stand, you can take a look if you want. But there is still less volume, easier ...