CARBONIZATION))) - Toyota Corolla, 1.6 liter, 2007

Well done, it turned out great, did it yourself?

Clear, difficult?

yes, we did at home together with a friend, the
first time they did it for a long time and pasted over only one part, and the second time in about 4 hours we did everything else, even a little less

at first everything was hard, then it was normal) it's
harder to make out

yes, even there you warm up with a hairdryer and pull, it takes the form of a part then

nooo) all the rules are easier to assemble than to disassemble) there is nothing left) now I think I can disassemble the panel in 15 minutes) and collect well 5-7 minutes)

unnecessary details are left?))))) but how can we live in Russia, without unnecessary details anywhere)))))

I had a piece 0.5 x 0.6 m

Enough with a full and still left on the radio tape recorder, cut off a friend on the phone and still left on one detail of some

how many cm of film do you need to paste over? half a meter is enough?

and there you heat the edge with a lighter and stick it, and like the rules, the
main thing is to initially pull it well

That is why she was cut off because she began to bubble.

thanks,
well, the sun seems to be shining well, it heats up and while all the rules are in place,
only the handle on the ashtray lid peels off the edge a little at the bottom, but you don't seem to have it glued over, but it's cut off around

It turned out great. But it is necessary to pass the high temperature test. I had to redo the ashtray cover, as the film partially bubbled when the interior was very hot. Now GUD. Good luck.

well yes)

"The main thing is to pull well initially!" - it is strongly said. = -)

I did not see)

here someone on the drive has how to fit)

thanks, I just couldn't make it out, the twists prevented me from removing the panel) did not break

buzz))) only a radio tape recorder would still be fitted :-)

but I didn’t pull on the sides, because if you pull them, the handles on the doors will not be in the subject, they are also silver, that's how I'll paint the handles, then I'll cover the sides

and I, on the contrary, left the middle on mine and covered two silver carbon fiber sabers! generally gorgeous!

while I'm just too lazy to do anything)
I'm still solving problems with the wheels) by the
way, buy the wheels from me)
I have announced in the BZ)

I will soon fit the same handles and steering wheel covers) but for now there is no money and time)

I don't know) I'm
tired

I think it can be replaced with a black gloss ...)

what for?

thanks,
only I want to rip it off already)

Well done, my hands do not reach in any way ...

Thank you!

carbon film is a very practical material) is
not scratched and dirt is not particularly visible)))

It turned out well with carbon, it's not even bad) I think to conjure with light carbon inside my Focus in this way)) 5+

Well, nothing like that)
at first it caused delight, but right now, something like that)

beautiful)))

kind)
well, I took a steam bath with him) it seems like it’s clear from the photo that it’s not bad)

good evening!
how did the bend on the ashtray turn out?

read another BZ) there is no more "carbon")

I thought you took off the plastic of the radio tape recorder - you will also carbonate