Entry, June 14, 2010 - Toyota Crown, 3.0L, 1991

The material that more or less came up turned out to be not viscous at all, so there are small joints. This is the first stage, or rather the balloon with glue ran out, but it was enough for exactly: rear doors, ceiling, side pillars (all). The next stage is the front doors, the pillars near the belts and below, and the trunk. Material: Velor-lux-2 meters 700r = 1400r. Stretch velvet (ceiling) 1.5 meters at 350r = 525r. glue-450r. + past experience on the white crown. I am almost satisfied with the result. As you can see, on the rear left door, a piece of plastic is broken off near the ashtray - so whoever has it, whistle-buy. In the photo, the ceiling is not conveyed how it actually looks. Probably it will also become a starry sky, there is an idea, it will be seen. The trunk will be trimmed with carpet and the floor will be covered with rubber carpet, everything is in tone. I started all this because the whole salon was in "points" from cigarettes, and they are in the most inexplicable places, for example: on the back of the driver's seat (between the shoulder blades) ... If not for these circumstances, I would simply take it off and wash it, and put it back on, because better than a native velor or anything NO!