Repair the caliper bracket.
Tired to explain all on fingers what it is and where it will make a record with photos.
Everyone knows that the brakes were good time to change pads, disc wear to a certain size, but if you replace the elastic bands of the trouble with the brakes you pass by.
It's all right, but often on some of the nuances do not pay attention, do not know or do not attach importance because of the impossibility to fix.
Normal clip in the standard position, after a decent run.
Even the photo shows that the depth of the well is about 3 mm.
After sandblasting the development becomes visible especially expressive, and the surface in the pit is very rough and full of craters has been eaten by corrosion.
This is the place where the pads come into contact with the bracket, unpleasant, but not fatal, braking will still be, however the output of the brake disc is shifted to the center, but the edge will form a distinct collar, well pads will be an additional place where walking, knocking and vibrating.
To return pads on the right orbero))) and eliminate them replace it is possible to weld the layer of metal in areas of wear and tear and grind to the correct shape.
Result. A flat, smooth surface on which the Shoe is free to move.
Another option.
Another one.
All consists of trifles.
pressure welding in the field of wear saves but not for long if, after the restoration of the staples not to change guides so it is better to athlete money and change
I'm at the back of the staples so doing, the grooves were a little more even pad wedge, 3 years go, everything is OK
if it is a welding between two iron getlucky Yes, but here no loads praticheski is not present, a pad rests.
Okay, and then asked a week different welders to weld — say it is necessary spets.electrodes.
I can imagine how much a file "to Kachitsa" to do it... can a**et)
Just Frezer! to the point!
In this case, it is necessary to properly otbirat bracket on a milling machine, to vyfrezerovkami the groove and NAPAT back plate cermet or CBN and forget about this problem. Cooking, and then gnawing a file is plebeian methods.
Oh, and what I had not read these posts, had to come up with, but as they say clever ideas converge... I love how you have decorated BJ and the blog was interesting. Well Done, Respect