rear take-out seats - Toyota Celica, 2.0L, 1995

For a very long time, too, I went without rear and sow a hedgehog day. Only the backs are standing.
The idea is not badly done and the design. what will happen next?!)))

then, I will just wait and joy to see the progress of the work!)))

of course the holes will be tightened with fiberglass, I want to put a frame in the middle of each cut-out, and stretch the fiberglass, and I will cut off the pocket in the middle at the floor level. I will move the window regulator buttons to the middle, leave the mirror adjustment on the door, and remove the glass raise button from the passenger compartment ... design in principle, there is only a few options for the development of events, I don't know which one to choose and I just want to).).).)

Wow, what thoughts. Here is the engine start button, heee super! And maybe it is better to make a panel in the style of a rally car ?!

thank you! of course I will try, I myself want something to start to end, otherwise there is complete devastation in the cabin).).) that's not all I do! I remove the air ducts from the middle, transfer the stove control to the bunker, I want to make a smooth front panel, put a clock like on an infinity, a slot under the seat, I will probably put the panel on the ceiling, and the engine start button ...)

Then it is clear!)))
But the idea of ​​a super car is certainly very similar!

no, I want to make it in the style of a super car) somehow I don’t like the rally theme. when it was not very high on its native springs, I lowered it by 30-40 mm, put the RSR springs shorter ...

Will Saf boof be in his box ?! or will its design be changed too ?!
Also, can these corners continue somewhere to the door ?! s3.images.drive2.ru/car.j...8ccdeb51592d320-large.jpg
Since there will be a design at the doors and it will be possible to start leading some kind of line from the doors, which will then go to these corners!

And so I really liked it!

I edited the photos there, what can you say? only objectively!)

But if you do the engraving, then only the dragon emblem!
I'm more fun with the engraving to glow.

I want to do something on the back of the sub, something like an engine made of plexiglass with backlight, so that the ends glow, you can make an engraving, it will also glow ... in general, there are some concerns about the sub, I think a closed case without a phasic can be made.

This is Yes!
But I think to give a little design to the sub.

a dragon can generally be vipilized with a laser and made in the center of the sub ... a good topic!

How is the progress going ?!

Hello, the work is underway. I even envy! And for now it has calmed down. Don't take me on airbrushing yet. I'm waiting for the master's sketch.

Hello! I cut off the podiums today for the middle, set the slope of the acoustics, you need to apply fiberglass and sharpen ... that's the way it is, but what have you got?

A sketch, but I'll show you. While waiting for him.
And so about airbrushing www.drive2.ru/cars/toyota...4062246863888413280/#post . But here everything is already changing ...
I want most of all for the exhibition.

Will you show a sketch later? Do you do a drawing for an exhibition or for passers-by on the street? I had a car with airbrushing at one time, if just for passers-by then don't do it so that you get some kind of incomprehensible stain, like that the car was just badly washed ... ) I just have designers friends, they explained to me some points, what should be what ... and there is a good friend who is directly involved in airbrushing ... airbrushing is a serious decision, I didn’t like it and took it off) ... write we will discuss!

I want a Little Dragon!))) So I'm waiting for what they will offer me, it is promised that the work will not be easy.
Black agrees, please play! But white, well, I don't even know how it is, although the colors all fit. Gray, yes, I agree, it’s harder, like that, it will stand out like vinyl.

well, yes, I realized that it was changing ... I saw that sketch. I had a light car with airbrushing, and then I realized that it is much more difficult and more expensive to do on a light one ... so that it does not look like a sticker, everything needs to be stretched ... or only select light shades, or just paint the whole car) I also planned to paint on my own, so I took a black car, the perfect color for painting, it seems to me so. but in general I like white, all my cars were white ... and if you do for an exhibition, then I think I need to do super detailing of the picture! What do you think?

It's right!
But I keep watching the trunk work.

Yes, the topic is this, it is worth waiting for the sketch that they will offer, and then it will already be seen ... a good dragon!)

Then I'm waiting in the right topic for photos and a report as that went!

right now, while with the middle on the doors I will figure it out)

Hello! Today is some day ... hr ... it's raining all day! So I just tried on what's what ...

prala! nafig rear saddles) so steeper) waiting to continue)

We need to come up with something!)))
If you don't mind, I will try to draw with a pencil my small ideas as you would like to do.

so far, the muse has not visited something much) I understand the design)

s4.images.drive2.ru/user...8ccf331ed6a19d0-large.jpg could not resist.

thanks! in principle it turned out great!