Carbonation (continued) - Toyota Matrix, 1.8 L, 2004
Vinyl wrapping training inside the cabin helped in the large-scale bonding! It took an industrial hair dryer (before that I used a household one) and an assistant! In general, the work is not harder than glass tinting. Actually, here is the result ...
First, thoroughly wash the car, remove the inner lining of the hood, spray nozzles for washing the front, wash the edges and degrease.
We put the vinyl cut out in advance on the hood, from edge to middle we fold one edge to the opposite one and remove half of the paper layer from the sticky vinyl surface. From the middle of the hood, slowly roll the vinyl to the edges, preferably in cotton gloves, while the partner holding the vinyl by the edges slightly pulls it towards rolling. Warm up with a hairdryer on bends and stampings.
Likewise the second edge from the center to the sides.
Then use a hair dryer to bend the edges around the hood!
It was cloudy, from afar the carbon texture is almost invisible, in the sun it is a completely different matter! I'll take a photo later (how the weather will improve)
Price tag: 4 000 ₽
Is there such a film? Either black or transparent, but with the transition I did not even hear!
Hachu from matte black from the frontal part with a smooth transition to transparent to the back part!
I took one and a half meters for 2700! There was a little experience in toning, useful + video on the internet. There is little roughness, but the dirt sticks like on metal, also evenly throughout the car! I have already infected three of them with sticking, people like it!
cool! cool author! Did you give it for the film? in the net I look 2.5 everywhere for a running meter ... and how much did it take for a meter?
a complicated procedure at all? 3D carbon it, as I understand it, is like rough scales, but there will not be such a thing that dust gets into these scales and loses its appearance? ..
Unrealistically cool! It is difficult to do it yourself, but if you have diligence and "golden" hands, it turns out great! Nice and practical)) no chips, no scratches))))
Come on, as cool as walking to Egypt! The style of the entire car must be carried out - then we'll see!
I will glue the roof in gloss by the spring, just not entirely, but under the effect of a panoramic roof
Hi, well done, that he did everything himself, it looks cool. When matreha was rolled up in black gloss, there was no 3D carbon.
I saw the Mazda once, I didn't even have time to rustle it - vinyl or painted ...
Cool. Can you tell me where to get the film? And then they podzoparili chips on the face, on vacation and they are right there. I think and saw on other cars, especially in the Crimea, that the film copes well with this problem and of course it is beautiful. Good luck.
Ordered on www.auto-vinil.ru/cat.htm really protects against stones, yesterday I caught a handful in Karelia behind a truck, not a trace ... they have a transparent one, relevant for new cars - poured on the bumper and hood and you don't have to worry!
Sergey, did you use a sealant for these edges (I heard that professionals use a special edge sealant or glue) or just glued it onto an adhesive base? Sorry for sticking here with questions, there are just so many small nuances that you can't remember everything right away)
He folded the edges into an overlap, cut a little in some places, in order to understand what is better to try on small details, without forgetting to warm the vinyl well!
I'm more interested in how to fold the edges, especially at the corners of the hood, do you need to cut something, or is it glued with an overlap? Are there any pictures of the back of the hood? Or explain in words, I will be very grateful. Whoever asked, no one wants to share their experience, and I really want to paste over the hood, but it’s expensive to unknowingly spoil the film.