installed a 3" outlet from the manifold — logbook Toyota Caldina 2002
track was made. The catalyst was cut, the insides were gutted, a flange for a 76 pipe was welded on. at first they were afraid that the sound of a blitz nurspec
can would scare pensioners in the evenings. But no, the sound turned out so juicy-bass. under than even without "flute." But I ran into one problem: the rear part went around the gearbox too low =( put two people back, pressed the gas and began to strike the pipe on the asphalt =(
at first I thought that the muffler flew off the fasteners =(
But the "barn", after all, once every six months there is a need to transfer something large and heavy. I had to urgently solve the issue of raising the rear part of the pipe. In the "exhaust" on the varshavka, they raised the car, decided that it was necessary to turn the pipe to the side and get rid of the rear flange (that is, the "jar" was made fixed, the flange was thrown out, which won back about a centimeter)
in general, it's better, I think, no longer come up with. If only to bring the exhaust into the front bumper ...
PS Oh, I almost forgot. recorded the sound of the exhaust.
a man from caldigna-turbo.ru did. bought, materials and mocked up and welded.
turned out pretty bad, I must say
no. I don’t know where the echo came from =( I wrote on a mobile phone, on a mobile phone without an echo. maybe it’s converted on YouTube like that? xs.
cool, I also want to weld myself but on a 63 pipe. We have enough atmospheric vegetables :)
no, nothing stuck. but it doesn't scream loudly.
I don’t remember the exact price of the issue, the exhaust was made for almost a year, first I made an advance payment, I didn’t rush anyone, and almost a year later the person was “bornâ€. moreover, a man built an exhaust according to his 246th, he measured everything on it, then he just gave me a ready-made whale.
Again, the question is at the price of the issue ... and did not measure the devices? how many decebels does it give out))))
why should they burn if there is one catalytic and one lambda?
Right now I'm only getting an error on the solenoids of the box. it is necessary to emulate: hang rezyuki on the connector.
well, I have, consider, and there is from the turbine, from the catalyst there was only one body shaken out and with an overcooked 76mm flange
I'll put myself on Wednesday as well =) the current from the turbine is straight and 76 to the end!
Oh, I see. I got it right. although initially there were two jambs: the pipe that went over the front subframe hit the handout bolt a little. perhaps because it was measured on the machine, and I began to put it on the mechanics and the back, which already went to the exhaust bank
, was originally straight and passed too low under the rear subframe, I had to move it to the side to the highest part
went =) on the impression I have a little quieter.
I look, they did the same exhaust: first they wound up in the middle of the rear subframe,
and then the can itself sticks out not at a right angle, but “in Japanese†to the side =)
at first my exhaust went around the rear subframe and the can stood “straightâ€, but back a man sat down, I gave gas and thought that Glushak had fallen off - it began to scratch on the asphalt. went to the "exhaust", slightly altered
aah, I see. like me, apparently nurspec?
Haven't recorded the video yet How does he growl? just wondering
well, cho, the easiest option =) everything is ready, gut only the insides and weld the flannel =)
PS each pictures =) what is the back of the "Bank"?
on your blitz nurspec R! link at work! I can tell you tomorrow!
or do you mean kuntsevo?
I once asked in the markets, they said something about 700r, but I don’t remember, it was a long time ago, I still can’t measure the diameter of the can