Photos - Toyota Soarer, 2.5 liter, 1990

I recently changed the bumper to the same shape, but there are various moldings, plastics, plugs, etc. on it. Once again I was convinced that the car did not participate in serious accidents, traces of repair only on a small section of the front fender and hood, apparently weaved a little in front, although there are still traces of poor quality repairs on the rear right wing. everything will have to be redone. I also corrected the wiring for the optics, it was redone so that the foglights light up when the dimensions are turned on, although there is a button for the foglights on the panel. The view became more pleasant, we became tidier. I was lucky with the bumper, I bought it exactly in the color of the body, and I have it in two colors. I can also say that when the car is standing, it starts to break down, it turned out that the gasket is leaking, which is located in ..., in general, from the back of the cylinder head, you can get there either by removing the turbines, but I already did it, everything is fine there now, and it’s not interesting, the second option is to remove the gearbox, at the same time I’ll change the oil seals and check what’s there and how. Also bought TEINs, I'll post a photo as soon as possible.
I also attach a video of the release, the sound is much better on a hot one, it's just on a warm car, because the antifreeze is flowing, you can’t train much, you just drove the car, at the same time wrote it down. You shouldn’t pay attention to the color of the smoke either, the reason is the same, a long downtime, as soon as the snow melted, I drove out to catch along the highway, everything was fine.