Installation of the central brake light. — Toyota bB, 1.5 liter, 2003
Today I decided to implement my old idea. Put an additional stop signal. The chronology of events is as follows. I removed the connector from the right rear light and using a multimeter calculated the necessary stop wires (minus - white with a black stripe, plus - green with a white stripe). Then I bought the lantern itself, I bought it from the fields, because it is more or less suitable for our vertical glass. Of course I wanted a regular one, but a new one on existential cost 3 pieces, and a second-hand one is a rare thing. Decided not to bother and pokolhozit.Potom held the wire in the tailgate, had to drill a hole. Connected everything, everything works.
The most annoying thing is that during the final operation, when I was already gluing roofing felts on the glass, I relaxed. felts hand trembled, in general tupanul and pasted crooked. Tomorrow I'll pull it off and re-glue it.
A very useful thing! I also want to do it myself, but my hand does not rise to drill, there are no other options?
Of course, you can lay the wire outside, but this is complete nonsense. There is nothing terrible in this one hole, it is not even practically visible.
Normally, it turned out, you only have to apply a new adhesive tape, buy only a good one, otherwise it will constantly fall off.
Well, cool cool :) At least the wire would be insulated, the atoms would rub against the edges of the holes in the tailgate and in an instant all the stops would go out. and your car's ass will lose its virginity for the second time :)
Who are you teaching to peel seeds?! Cambridge is awesome! It is necessary to put an elastic band with a hole, or a corrugation)
In general, where did you get the idea that he should fray? Everything is fixed there.
I'm thinking that it also won't hurt to put a rubber band on the hole. I don't think it's hard to get the diameter right. as well okay.
I once upon a time decided to hang a stopak on top of the field. In order not to drill anything, I ran a wire under the rubber band of the rear window. But the glass is glued on the bb and such a joke will not work.
In general, the idea is good and necessary! Well done!