He came for the car and what ... Oh my God ... - Toyota Corolla Runx, 0.6 liter, 2004
I mean, I come early in the morning for the car and that's what I saw there O_O I think about God, what the…
But the point is that it was all done in order to put the end of the "fun" (music is shorter) in my typewriter URA URA URA I'm so joyful, there is no limit to my happiness :) :) :)
In the morning I came to boxing. They removed the front skins and I myself began to
make noise with my own hands.
Then with a vibroplate, already more thoroughly, I glued it, I didn’t regret that later I had to cut off the excess in some places :)
I also wanted to buy a splenitiser, but I didn’t find it anywhere, well, okay, it doesn’t play a big role ...
While I glued the noise on the skins, the guys pulled rulers and ... in short, wires around the cabin, made acoustic rings and rustled the doors with a STP m1
Noisy hard, Shumkov did not spare glued bits not on top of each other pieces.
the passenger seat had to be removed, because. one of the amplifiers was placed under it, the second amplifier will be in the trunk.
The rings are already ready and partially installed, I suspended the process for shooting :)
Then I played around with Vibroplast Shumkov and glued it wherever I saw, one side is almost ready,
though the skin didn’t fit a little, I had to file a little ring, it turned out to be a little big: ((
But this is all garbage ...
In this photo, the report was completed, there was no time.
And the battery on the Nokia 5800 Shit Camera still ran out of everything (everything is fine, but the camera in it is Barn, but more on that another time)
In short, everything was installed, attached, attached, screwed and already at one o'clock in the morning I was driving home with a boom in the trunk:):):):):)
:)
Kicker thumps God forbid of course =)
Such a useful prevention for the soul, but not for the wallet :)) Will there
be photos?
Great! I also have one on the potiac under my native seat on the sub, and the other will be in the trunk, in a couple of days I’ll go for such prevention :))
Yes, I know that it heats up, there is also ventilation 0, and I still have a dua at my feet, but there wasn’t one in Allex, it will be difficult for him in winter, but since I hardly drive a car in winter, I think everything will be fine, yes and I don’t listen to the muse for all the money often, if I don’t listen for a long time, here :)
Damn, Lech, I am getting warm under the seat :) well, it's true if you listen very loudly for 40-60 minutes) and it cuts out. Sometimes even over 30 it heats up ...
It's for sitting and enjoying :)
Oh, you racers, everything is measured in seconds, I don’t need this ring, I’d rather go karting and ride without damage to the car and my pocket, here :)
5 sheets of STP
2 vibroplast still a little bit left on the trunk
of wires 3 rubles
tee 260re
corrugations somewhere on 150re electrical
tape 40re 2 end
knife 11re
Like everything :) :))))):)
Great deed)))
Soon I will also do this, as finances allow ...
Tell me, how much material did it take?
and an approximate price tag, but now I don’t know how much to expect ...
That’s exactly what it was, I don’t know where this fucking +
Plays well, but there aren’t enough mids ...
Well, Lyokha, you upset me damn it = (it was necessary to take the money from you) and why don’t the boys have tseshki? if the quality is worse than my play, I'll stick you with bream)
Plus, they didn’t find it, xs where it is :((
I’ll have to go put the pocket in place and + look for and do it right and I’ll redo the sandstones, they’re worth so much ...
And the money is no longer ma **** :((
Honestly, I thought it would be tougher, but the head still needs to be adjusted, the settings go astray all the time: (((
Good dravishki) you need to listen. I hope I already got quiet in the seat when I listened for the first time?)
Congratulations! The necessary weight in the typewriter! ;) Oooh, I would like to change my music as soon as possible!
I saw the first photo - at first I was scared. Right job!
Imagine, yesterday my hands itched, as a result, I dismantled the doors, glued the scalp, processed them and stuck to further gluing. In general, I took up the same job, only it was decided not to install a subwoofer, the trunk is sometimes needed for bikes, boards, etc.
Ahh) Yes, it’s already done from nothing, the pieces are left, but it’s a pity to throw it away, and it won’t be superfluous!
Perhaps, my Drugan prior made a lot of noise and gave 15 rubles.
Well, I think the ipsum will be 1.5-2 more expensive than the ruble
Well, we can say, we glued it ourselves,
5 sheets of stp for 300 rubles each, 2 sheets of
vibroplast for 600 rubles
glued so far only 2 doors and a trunk, there is no time for the rest!
As I understand it, you want to make noise with the ceiling and floor?
buddy, and if it's not a secret, then how much did the Shumka cost? I’ll just do it myself soon in a circle and I’ve got a horse’s price! so, I want to compare, for the sake of interest ... if you want, then you can answer in a personal.
Ah. I don't know, I just haven't climbed in the door yet. There is already a changed divorcee ... In Nissan, it was like that for me. In the summer I will change the front, I will study;)
Why, but what to put the dynamos on?) They don’t go at all, they seem to be assembled with a native speaker!