Gggudok part 2. — Toyota Mark II, 2.0 liter, 2001
Let's continue!
As I said before, I ran into a problem. I did not pick up the fitting, which is not understandable.
I had to replace the receiver, found another. Freon bottle.
Bought a beep, the biggest one! And immediately ran into the problem of installing it under the hood!
From the beginning, I put the horn under the hood, but at the first signal I realized that it was beeping quietly and it was hard to hear on the street. Altered under the fender liner, so much better.
I ran the wiring and hose under the bottom, along the brake hoses.
Made an additional soundproofing pocket. From the beginning splenitis 8mm. and then vibroplast 4mm.
I install the compressor, and everything is connected.
After the first check, I found an air leak. I had to buy tape for carving, and rewind everything.
Now happy as an elephant, I really like it!
So the compressor is with the receiver! And the beeps with motors are very quiet, but I did it like on Kamaz.
why didn’t you take an electric compressor special for such pipes? and there would be no need to put a tank
It hums very loudly! At first it flew, and then I wrapped it with a rag! It is possible with a thin paralon!