The first mods on the car - Toyota Land Cruiser Prado, 2.7 liter, 2007
and since I wrote earlier and this entry is all the first work on the car.
and so the fogs were connected (in the UAE version 2.7 there are plugs, and even if holes are drilled in them, it will not shine normally) it has already been checked, I also ordered a button for the fog and connectors, you can put everything yourself. put the current one because nedogladel and ordered one plinth with a train for tumanku. reordered, everything is put very simply =)
I also bought a headlight corrector button and a backlight adjustment from Optitron during the analysis, I will connect it, there is a connector on the corrector, so I put the button on, but it doesn’t need to regulate the motors on the headlights, but I think to order dark graphite optics from the final version of the European 2008, so to speak limited .
here is a pic, will be added later
this button for the signaling diode, the original from the Lexus
and the off button. parking sensors, as well as a mirror heating button. And there will be a new folding mirror button. i.e. there will be no stubs at all =) and everything will work.
all buttons are illuminated.
but with my Lexus lamps there was an ambush = (the wrong bases came, later the wool prado-forum, then two bases can be used from native lamps and 4 must be ordered, I need only two. I tried it on and decided to do everything. It took 2 hours to work. (didn’t connect the lights) I had to cut the door, otherwise the lights wouldn’t get up. and here after installation, a strange feeling came to leave everything like that. i.e. with native lights, and make an exit on the door so that the reverse gear is on. and in the native headlight, make it so that two lamps are lit on the turn signal. who will say what?
here for comparison
stock
with insert
lexus lights
and I found this on the forums of America and Japan, they put lights from the prado on the GX470 and something like that comes out.
$25 is out. Here, too, a trifle is surprising. you know what else surprises me in pradike everything is there, I put all the buttons on the back of the connectors. those. Stupidly you buy you put and it works for you. you buy headlight corrector motors for 4500 and stick a button into the connectors and you have a headlight corrector, also with fog lamps. you stick the button and the socles and everything plows =) ) )
checked it out today on the GC, the same rubber band between the doors ... cool.
I was very surprised why they are not put on prados in stock.
how much did it cost you?
Yes, such a type of tuning, and I have a couple of pictures. the second small one is not inserted here, but ours would all be happy. =)
it turns out that people on the GC, specially put the headlights from the pradik or what?
wow...maybe create a headlight swap website?
so that everyone can be satisfied and happy ...)))
No, they are all yellow. there is still a white turn. super flashlights, but the original is expensive and we only have DEPO everywhere. =( but I don’t want something orange
Well, in my opinion, the Lehus USA has a completely cuirass ceiling, the euro has yellow turn signals!
I didn’t see one of them (with USA in mind all the cars) there were yellow shobs =)
You let's tie it up, the rear stock does not look good, put a love from the Lehus Europes, in kind I will untie the vidon =))) from me as a usehda!
Well, I don’t know, I really like the taillights on the door =) but let’s see what the thread is about and put it. Lexus are still waiting for plinths =)
I'm talking about rear stop signals, turn signals and others))))) you want to put from the Lexus) I'm against) or stock or something rare.)
I put tumanki almost the same, they are original and from the European. and it is not clear that they are with or without a lamp
=) for me, you don’t need to mow someone) you need to remain the way you are! those. with stock or stand out from the crowd, i.e. do something unusual ... buy rare, or to order ...
With an insert, it’s definitely better, with headlights from GX I saw a couple of pradiks, it looks cool, but I think that all the nameplates should be removed then ... As in the last photo, the current without the Toyota badge, it seems to me it will look awesome ...
In the cabin, I did not find the end of the wire from the fog, although the other end sticks out under the bumper? Do not tell me?