Preparing for an Upgrade + installation… — logbook Toyota Corolla Levin 2000
It was like this:
In winter, I began to buy everything to put the shafts.
I bought Toda 288-8.5 shafts (there are split gears and reinforced springs in the load, everything is Toda), then I bought a SuperTech valve + 1mm hat on ebay, then I bought a second cylinder head so as not to walk while it will be cut. Looks like I bought everything.
In the spring, I opened the motor, went over the bottom (the motor was made alive to calm the soul), put ACL liners, new pistons, rubber rings, well, in general, a complete rebuild of the bottom, + I just installed Toda's flywheel paired with a ceramic disc. Run in 500km and went to the 1st stage CHEDRa :).
The only thing that was missing was the Brains, and then turned up with the option of Ultimate, bought connected went.
I sent all the good stuff to Tyumen to one not little-known picker 4A, he had to do the porting and collect the whole head ...
And finally the moment came, everything is ready, they say: come set it up and immediately to the tuner, he is just waiting for you ...
and on July 14 in the morning I was going to Tyumen, Yura met me and took me to the garage, helped me put it on, put another head on, in general, at 9 pm the car was already started, of course they didn’t get into the phase, it worked like an old motorcycle that always wants to stall …
Let's go to the tuner on our own.
After fiddling with an hour or two, he set the phases (the manual could not be found, therefore, for so long).
appeared an approximate idle.
To be continued ... there will also be photos.
respect guys. I probably will never gather the strength to climb into the engine for the purpose of tuning, and not capital)))
Excellent)
Quater measured? Has it become much better to go, has the engine speed been raised higher?
Has it gotten worse downhill?
It's good when the strap, not the chain, you can play around with gears)
I want to see it in action, but tomorrow I won’t be able to come to a dead end, maybe I’ll come next time if my wife is not going to give birth))
if I haven’t forgotten, then recommends 103/105 vp / vyp. I have papers for these shafts, I can take a look. how is the ultimat? I am very interested in this computer, I want to try it.
Malatsa. I look forward to continuing!
I also thought to get confused with the atmosphere, but then I figured out the budget and decided what kind of loot + 30-40ls + dip on the bottoms, not very thick :)