Cilia — logbook Toyota RAV4 1996
I decided to give the rafik a little frown)) and highlight a little))
who is interested in the production process itself:
1) Remove the headlights
2) glue them with masking tape
3) smear them with any oil, even Oleina, even with Spectrol
4) apply fiberglass and impregnate with resin
5) wait for it to dry
6) tear off the cilia from the headlight
7) degrease them as you like, as you like
8) putty , paint
9) put
10) go to the center to show everyone))))
Issue price: 13 427 ₽
a bottle of 1.5 liters of alcohol costs 250 rubles
enough for 5-8 hoods
Can of wax 1kg 600r
enough for 30-70 hoods
And what is the cost of this alcohol or wax and what is its consumption. When I did eyelashes, I glued it with simple adhesive tape. I know for sure that epoxy does not stick to polyethylene, but if you do something big, then tape is inconvenient, and the bumps will then grind them hard and for a long time. There is something very budget-friendly and practical for a release layer. Please tell me
The oil is needed to get it off. For matrices there is a special release alcohol or wax
Hi explain about the oil that it gives. Is it something like a gelcoat, can it be separated from the matrix with oil, or with saline. Share some information I want to sculpt a bumper. Thanks in advance.
just a release wax, I don’t remember what it’s called
on the market, you definitely won’t find it, it’s sold in places where they sell resin and fiberglass in large sizes
So it's okay. And what is better than alcohol or wax and give at least a couple of exact names so that you know what to ask on the markets of the country
It's clear. What is the dosage of resin? And then I still found 200 grams of type a set of epoxy glue.