Refinement of the automatic transmission hydrobrain, new exhaust and stage II of Irkutsk drag racing in 2010 - Toyota Soarer, 4.0 liter, 1991
To date, I am the owner of dorobotannyh gidromozg ala Good. My automatic A341.
What they did:
-Increased pressure throughout the system.
-reduced gearshift speed
-reduced speed on D-ki
A lot of emotions ... especially when at a speed of 110 with a slipper on the floor, the car switches from second to third so hard that then you literally have to catch my barn on the way)) such a kick in the ass))
From first to second a little softer)) but also quite quickly ))
in the usual vegetable mode, you can easily ride. not particularly stressful. but with a slipper on the floor, something unreal is happening.
All modifications in time took about 5 hours, removal, reconnaissance, revision, assembly.
On Saturday, 07/31/10, we really measured what improvement it gave on the dredge. And it gave a decrease in time by 0.31 seconds. That's it))
Well, one more small plus: now there is fresh slurry in our machine)) it was necessary to change it seravno. so tuning is not harmful, but beneficial ...
Costs: 1 pack of ABRA heat-resistant sealant, 6 liters of dixtron, 3 shawarma, 1 liter of Cola and 5 hours of free time)))
08/20/10 We
welded the correct exhaust for the V-pivot. Separate pipes, 63 in diameter from the very-most, no resonators, catalysts are knocked out.
I'll upload a video with sound in a couple of days, as soon as I get it right with YouTube))
her)) this guy in Irkutsk is trusted by everyone, the most big-headed in the city. and hands from the right place)) when some of his projects are seen live, they immediately write to the ceiling with steam))
the most difficult thing there is deciphering the brains ... how it flows where and how it all interacts cool ...
Just if you write a detailed article about how to finalize the hydrobrain in at home -Harvest, for example, immediately lose half of the income))) and who needs it?))
as a potential client of such box makers, I’ll say that I would not give such types of aggregates that supposedly “secrets†are what they do with the gearbox)
unfortunately not rich yet.
and the guy with whom they did it seems to be going to cut the loot on this business, so it’s unlikely that he will describe in detail what is being done. :(((although time will tell. maybe he will write down, at least a theory ...
so, interesting)
is not rich with a link to an article on finalizing the hydraulic brain?)
where the switching speed depends on the diameter of the holes. there is nothing complicated there ... mono and 0.1 seconds to do. just the cardan will wrap from such a switch)))
but they say he and the hydraulic brain adjusts correctly, gear changes are 0.1 seconds, unlike other modifications, where this time is somewhere around 0.7s.
Appreciated)
in the winter I will also take care of the machine, but I think I will trust Harvest in this matter.
Great job done! improvement by 0.31s is not small at all!
Do you have a step automatic?
and here the master felt-tip pen himself showed up))
Sanya, very soon it will be like on MTV:
"Please, Good, pump my hydrobrains"
Hydro brain tuning drives, everyone in Irkutsk and nearby is welcome)
the effect is finally right, the Americans and Australians don’t even go for rolls without this, now we will all soon switch to brain tune!
Let's start a new show. Let's call it "Complete rework in Irkutsk"
who will be an ex-Zibit? :)
PS here is a close-up photo of your shed
photofile.ru/users/ledokol88/200064201/200692536/
at the 4th stage there will be more cars close-up;)
And I'm not saying that it is necessary to connect with a resonator, just between the pipes it is necessary to make a jumper in the form of a pipe of the same diameter, the sound will not disappear anywhere and the pressure in both parts of the outlet will equalize! Google "V8 exhaust system" and look at the trite pictures of absolutely all systems for the V8 are connected! Here is an example of how to connect www.bestmufflers.com/bsho…/images/manta_cdresys.jpg
I also have them in stock. there are 7 cans in the drain (((one of them is a central resonator.
I only have 4 cans. pipes are parallel. each from its collector ... there are no resonators. this gives a specific sound of boo-boo-boo-boo, which ranshi was smeared in the resonator.
Well, in general, as far as I know, they should be connected, how many releases on V8 I saw all connected! either a cross or a jumper in the form of a piece of pipe!
are not connected anywhere. each pipe separately. awesome sound. it is necessary to write down and lay out as a thread))
no, the hydraulic brain is not for sale.
left 340 automatic, it is controlled by the American process AEM