Cleaning the air conditioner evaporator — Toyota Camry, 2.0 liter, 1994

Actually, I've been dreaming of doing this for a long time.
Unfortunately, there was no fotik at hand.
What was done in brief:
1. Dismantled the entire torpedo.
2. Washed and all dampers and air ducts with deflectors.
3. All motorized climate dampers have been revised (lubricated and cleaned, although Yapovskaya technology is mega reliable), plus a stove fan.
4. All dampers changed seals, in the form of thin foam.
5. The evaporator itself, after the descent of freon, was dismantled, soaked several times in a bowl of powder, and spilled with water under pressure.
6. I collected everything for a long and tedious time), laying the wiring again with foam rubber, sealing all joints. Housing climate-stove was glued splenom. Partially tightened the air ducts with splenitis.
7. The evaporator body itself was cut. Rather, he made a groove for inserting a frame. I made the frame from the remains of the LSD monitor case, pulled on a filter cloth.
8. … I don’t remember a couple more)
…
9. I filled the air conditioner with oil and freon, 1500r.
10. For a long time I drove in circles in my sleeping microdistrict. enjoying the cleanest air

Then I took up Shumkov, and still haven’t put a few panels)