Painting The Fields

that is T9 without nail Polish much faster and easier)

it's good when I can paint without Kaka=)))

no. without Kaka, paint and so expensive)

Handsome. Acrylic lacquer or varnish?

thanks, still have to aspire to)

Great job! Now as good as new! Respect!

thank you, I would gladly would like to become a master, but still just learning)

Class, practice makes! Congratulations!

the diluent is not added, afraid that did not drip with large shagreen not bad in terms of the fact that is not so scratched, it's already to go every day in the fields, I saw her, she made out of mud and grass soon in the cabin will start to grow, Windows seclevel the contour is so much easier, that and the lace there is no need so will do))

Purely friendly advice, look turned out sarenka not very good, but to make it minimal, when you put the last layer, add another 15-20% of the solvent, it is better than "dribble" and will Shine almost as if polished =) Under the gum on a frontal lace run along the contour or pasted?)

Temir42

Now put the orange peel, cover with lacquer and polished. While it's not particularly looks, but after will be like new!)

now to remove the shagreen?) it turns out all the work on the new almost periodlate)) to knock down the gloss, to varnish, to knock down the orange peel on the lacquer and Polish? I understand?)) nafig it is necessary? well this is Niva)

not through the forest one went, scratched almost on the first day already appeared)

Yes confusing, the first forest and the branches will escarpeta all.

Now put the orange peel, cover with lacquer and polished. While it's not particularly looks, but after will be like new!)

well, I have a fake Chinese SATA 4000 Intertool PT 0100

Sata 3000 )) an old but quite decent

probably a cheap roller I bought a damn what you use?

As roller painted... as matte whole.

with your words, I agree, is that the situation does not allow so qualitatively all do, time is limited, money is also, and to pay nobody wants more

Seems good, but pollinate necessary. And my advice to you, if you want to become a master of his craft, then do not be lazy to pull out the first glass, but there soon the rust will come back. You just need to learn not how to save (time, money), and how to do everything.

FLY-avto

painting depends on the hands. Any way from the spray gun.

at the hands Yes, but the gun is very much depends. as training

Oh well))

Clak

for garage and expensive equipment (just be sure that the spray gun is not for 40K) the result is not even bad.

painting depends on the hands. Any way from the spray gun.

so he knows his worth, and certainly does well the first year, and I painted 4 cars and can not boast of a perfect result

Savvi

the gun is not a Pro, bought for$ 100 before the jump rate, and the machine is expensive I do not paint, there is neither the capacity and the garage is small and not the main it's earnings, and just for myself)

My friend drive the car from Moscow to sa for 2K bucks. And He wears a gun for 30 bucks and in the garage.

Here I am as well)

the gun is not a Pro, bought for$ 100 before the jump rate, and the machine is expensive I do not paint, there is neither the capacity and the garage is small and not the main it's earnings, and just for myself)

for garage and expensive equipment (just be sure that the spray gun is not for 40K) the result is not even bad.

thank you, but you need to work on quality)

I have Todorovic glass in the field took 10 minutes.the rear side legs vyyavlyayutsya in place with rubber bands, within the same time and all put back)))and so on painting molodchaga)))

know the budget and painting, where you save everything you can, time and money

In General, for the Fields and countryside well. Glass but still need to take off. It's an hour of work. Otherwise the first thing the schools will be under the framework of steak. And there's the near and the next painting...

probably Yes, so all say who does it)

does not take place. It's addictive. If you started so no turning back...you can only break time to do, but then again want to be!

I hope if you do not pass hunting to those engaged in

well, I also — nothing will stuff his hand

that trying, not so easy, especially all by myself, nobody taught and not shown, at random and the Internet

=) fill your hand. Will succeed!
Everywhere people are painting.

can you give some advice?

pechalka

In the plastering work.

read the pamphlet, decided to show off knowledge?

Toretto412

2000 skin take it all and buff

skin know where? ahahaaa (SANDPAPER) and th sense kopeck piece it will be? a gradation lowering risks, who will? otherwise HY propolisul then! the more acrylic! clever mlyaya

that makes no sense, it has all satgana after fields

2000 skin take it all and buff

Savvi

judging by the comments not very) well tried

then hike only one radical ridicule in comments pretzel in Novosibirsk, the campaign they have there is permafrost all sags and quickly harden

I understand it will be still polishing?

judging by the comments not very) well tried

For pelvis — an excellent result.

well, not to redo the same)

go)

Don't know but in YouTube a guy with a key it scratched avoid scratching

they have better quality than the NOVOL?

Upola it was necessary to blow forever

it would be better in khaki.IMHO

www.drive2.ru/l/85469/

For the first time very! Practice often, you'll be a Pro)

The paint quality is not bad would camouflage looked. I think so...

Who about the Lac asked questions and sprashivay

GUKR

Paint! Where is Lak?!

and the meaning of the acrylic varnish?

it's acrylic, and not to base coat drive!

Paint! Where is Lak?!

ruts

and why the ground gets in?you vid to the metal not removed the paint

no you didn't, there was lots of filler and deep scratches, parts washed nebylo to ground

every detail shpatlevanija and glubokimi scratches, not washed away chunks to ground

was chipped, apparently, did not want to bother filled with soil and ready))) will eventually subside is pornooo

and why the ground gets in?you vid to the metal not removed the paint

in the pictures you can see that the last layer of acrylic was dry! acrylic paint in two and a half layer, the first mesh-semi-dry (to wet the subsequent CI...camping), then two wet laid, of course with intermediate drying!

Yes, and even some figures the color blue somewhere somewhere greener...

Yes, I also 377, I heard that depending on the year the other figures)

=)

Exactly 377))

old Moray ) 377 if memory serves )

thank you, but I try to do each time better

well it turned out

thank you, but I try to do each time better

Very nice !

Yes well done, if not hard can the PM describe a detailed process as and than, on Sunday also start

me))) tell me what you were painting tool and so on.

do not repeat the mistakes of others

Yes well done, if not hard can the PM describe a detailed process as and than, on Sunday also start

Shoals are opornych painters.

should aim to do even better, and there are shoals

Well it turned out.

for this, and it crazily, in the fields Eddie now on sale

for the rural areas going!

you know, all depends on the price, time, etc., to work as always, and to a lesser amount than ever, no one probably wants

Norms paint for the fields, if you know what a field do we need...nothing of course did not take off all the moldings and rubbers from the body(e.g. frontal), over time, begin to travel to these places.

try to do each time better

Not bad, not bad...

I, too, support. Good painting. A lot of work. The owner is great.

thank you) well people don't like, and I'm still, still no one knows the terms on which I painted)

Th there not all like that I do not understand)
Looks pretty good. Well it's not a brush with cushion Krasino.
Decent budget painting!

hodowca all dead, box, etc.)

Normally painted springs (front), looking sank...

the field not ice is painted, a good way wrote

Similar to an orange, not a color, and surface.Perhaps its paint the Raptor in the color of paint that in the documents.T.to painting the Fields is a philosophical question "will paint well-sorry for the bushes to drive, paint is bad-Najera then paint(neither aesthetics nor savings).Raptor I think all will unite-and special style and resistance to damage, and the most important thing when training the body-anti-corrosion effect.

did not understand a bit
did

He ? It is !

Malaric I also paint, but in the details!

)))))

the village will go!

Short-lived it is... to pull away will quickly, even for her standards needed. But it is also bettor like...

cheaper and easier film to paste it...

I like it. Well DONE

new fender liner. a new grille, stamps, paint and a new will. but the best course grandmother in the technical part to invest if required

=))

the pollinated love a lot, it's a garage) and so 3 Staticide wipes left

Shagreen is certainly strong. or pollinated a lot of leg. but for the first time good!

Well done

here's another painting www.drive2.ru/b/2114016/

Maybe someone was so stoned or drunk to think of this... In this case, it's better with a roller Yes brush)))

I twice completely painted, now for the third time going, all the while painted with acrylic assholes who knows nothing about painting, pulsecom for 900p and which compressor wheel to pump really can not, naturally without the camera, and they more or less came out because the acrylic, metallic paint they would in such circumstances not put their words

I do not agree. Acrylic initially semi-fluid, and everything seems cool, but potokom the fun begins when, in places, ill-prepared, he deflates and out "wrinkles". In addition, acrylic is not all know how correctly to put. I'm not saying that the base must be able to apply, but it's easier somehow)))

Daemius

Acrylic a... way... better, of course, under base urethane varnish... however, the Niva all-terrain vehicle, her gloss on anything...

and what in it difficult? acrylic paint is the easiest, it fills all the risks and forgive the poor quality of training, besides does not require a lacquer on top

+1

Acrylic a... way... better, of course, under base urethane varnish... however, the Niva all-terrain vehicle, her gloss on anything...

thanks)good luck)

well then, HAZ, good luck, you're out in front, like me)

I'll wait)now we need to save up enough money to buy standards materials, and then the garage to equip, I'm in the North, so we have now 13 plus rain)to do the heating.I hope the winter will be all set)

nez, I signed up, I will wait for the painting))

clear.thanks for the replies)

2 banks litrovyi and hardener, paint PPG

clear.and opendos you wore about the same amount of paint left?

0.8 and 250 grams of hardener

and the banks were liter or 0.75?

well, we got 2400 UAH)

about 6 thousand.well, the rules.okay thanks for the replies)

it was possible to them, but it is impossible to paint, and I had a budget painting, Vicolo at the new rate a little more than $ 100

I just heard about epoxy and acid soil) and how the price came to you?

hi, the materials are some of the cheapest, paint NOVOL, soil MIPA HS, spatika with steklovokno -the chameleon, and universal NOVOL-profisoft

Hello, nice colored)) got a question for you, what materials are used?what is the soil? also going to paint the 06 in exactly the same color.

thank you

Well done.

as I have understand, then I washed away, I oblea and painted

and podkapotka as colored?

General rules, even the matte field is, polishing should not have! Hammer!

Shagreen hell... =(

she cracker crash Mat and perepali stains...it's better to cut

Kitas

don't know how-don't do

I see you did a lot. The man went and did. Unlike you posttrip

not seen fat man lives. for me, though tassel
when the kiss. the technical condition is not affected.

don't know how-don't do

the main thing that most liked. for the first time will go. next — get better

pressure is probably the biggest mistake I pay little attention, Kady just different, I have a gun 1.4 nozzle, torch good even when all open intertool.ua/catalog/pnev...lp/intertool-pt-0100.html I just always thought that the pressure should be in the natural Sciences 4

Ventilation is difficult to do. The principle is simple.
The purified air is fed from the top (down the dust and pollinated) hood is made of pipes with holes at floor level ( floor total area of walls) and is sucked powerful extract on the street.
In the extreme case, podseli cellophane on the entire floor and drench the walls and floor with water. So dust will be less (much less). It is very important pressure of the gun. I do about 2.1 (there from the nozzles of course depends). Put the pressure gauge to the handle of the gun. The one on the compressor shows. Less pressure less pollinated. And torch look. It is narrow should be 15 cm (not blurred). But, it all comes by experience. Now get the sandpaper, 1500, 2000 and 3000 bar. Paste polishing medium and small-and-forth score. Then polynesi and everything will be OK.:)) Abrasive paste 3M. There are cheaper paste abrasive. And polishing machine walk. Then finish polishing or wax sodium. As eggs the cat will be.

Thanks for the advice, I think the pressure was great, + no ventilation this poll a lot

Shagreen and peel off the skin, polishing with an abrasive.
With acrylic all the easier. Score, buff, and Shine as "ay...and a cat" :)))) perepil the leaves, peel solifuges. Acrylic taxis in this case. Hail, not metallic.
Well done. All first time start. Maybe the pressure is not enough (too much), the spray pattern or lead the gun quickly. Potreniruetes and all the rules will be.

it is clear, sorry

saabeer

all right, but you have the disks to upgrade then, and I don't really look

details of course do not know, but asked the price again for painting

a couple of days ago broke it)

all right, but you have the disks to upgrade then, and I don't really look

in the campaign in any red)))

I have the documents cherry color, what color you paint your car ?
Understand that it is not "orange" or "watermelon" )))))

The Raptor was painted on the field, holds everything fine, but the new sealant put on the system as previously wrote

Thank you for such a detailed response !
And the Raptor is not painted car? I wonder how under such rust climbs ?

Clean up mechanically by the Maxim, ideally, sand-blasting, then rust Converter, then epoxy primer, sealer on it, top arcaloy primer, paint
But it is a disease, there is double metal, and it rusts from the inside if out out the inside, you can imagine what's going on, if you do forget then weld it new reluctance, dyeing and processing hidden cavity, well, or tint every three months, well, there is the technique everyone is different and I guarantee gave

What to cook then? just mushrooms with a seam climb...
Here's an example of my Nivas tell me how to deal with it?
The car was painted in the 14th year, since some parts where the panel is of the reddish hair he'd...

Here on the threshold if for good the welding is, if touch up then every three months until the hole and then still welding))

Savvi

First, all wachesaw if there's rust Converter then a walk, then primed, the primer seam sealer and paint

how to fight?

the soil is placed under the medical devices world level?

Yes, the sealant is elastic and treskaetsya will not, but be sure to primer or epoxy Chistoty

In! So the medical devices world level still!
He plays in the paint don't crack right?

And I have one friend, the welder told that they do not mask it and paint the seam (transition) between the body parts but the rust still be made, only one way out to get rid of it is to pass sutures from the inside, as rot starts from there.
What do you say does it really do?

That's where the Lada and the front and back matter...

First, all wachesaw if there's rust Converter then a walk, then primed, the primer seam sealer and paint

Tell me the joints on the body than you go?
And then after painting "abicab" usually at the joints paint begins to crack and the rust starts to shove.
Here in these places...