How the replacement of the lamp flowed into soundproofing ... - Toyota Mark II, 2.5 liter, 2000
Well, where to start then? I'll start with this, in general, I got sick of the fact that the light in my visor is not lit ... in the passenger compartment it's on, in mine it's not! Well, it flew ... Screwdriver in hand and forward ... I unscrewed it, and what do I see ... a folder of chips sticks out in the visor, but you can’t see the chips in the ceiling of the mother?! I rummaged around with my finger, no and no again ... what to do? Remove the ceiling, I decided! And look for a mother there ...
And what did I think to shoot for nothing? Once removed means: 1) Clean the entire ceiling and 2) apply noise insulation! Well, away we go, shop, buying Shumkov, buying a vibra and buying a cleaning agent … And here I am in the garage! We begin the disassembly ... Lanterns down,
hands down,
parts of the interior from the racks are also down ...
After I unscrewed everything, I could not normally pull off the upholstery of the middle pillars … This was prevented by belts! I took the key for 14 and off with the belts too ...
ALL! The ceiling fell into the car, how to get it out? I read a lot that it comes out through the back door like clockwork, but no ... Then a friend came up and said, bend it in half and pull it out, they won’t be for him ... So they did ... I reluctantly bent it in half and began to push it out! When it was pulled out, I noticed the roof! There was some kind of spongy fiber material.
Japanese supposedly Shumka))) I tore everything off, took a brush for metal,
and specifically walked her through the remnants of the Japanese Shumkov …
It seems that everything has been removed ... Well, I started soundproofing, first vibro STP Silver,
then Shumka Splen...
I didn’t take very thick material, because. enough for the roof))) And, accordingly, I am very pleased with the result ... Oh yes ... How did it all start? I did so that the backlight in the visor was on, by stretching additional wires, because. I never found my mother's chip!
Issue price: 900 ₽
well done great job =) In our machines, everything is interconnected! I started doing one thing, then along the way I want more and more =) =)
Lech's hammer I didn't expect anything else from you) ) in which store did you get the Shumka?
I took it in the Automotive Continent store in the Gorbunov Audio department ... I spent almost 3 sheets of vibro and one Shumkov)))