Ambush

Well then, in the garage, throw a piece of tile in the Converter and see what happens.

I have the plumbing so had powder oxides and all around, removed without a trace. Or rather rubbing is not necessary to give ottenuti, and not to give to get where it is not necessary, in the seams, chrome, etc. then with a sponge lightly.
And of course to try first on a piece of that tile is not eaten, you never know how things will go.

We ought to try, just half a tin of the inverter in the garage is.

Ordinary tile or some sort of complicated relief, etc?
Directly on the wall with a sponge, the grout take care of only, and then to cement eat.

The problem is that the pipe cut after put in tile.

Eckat

It's just like my tile in the bathroom at home, laid tile, and then changed the towel, cut off the old grinder and is now in the same place all the tiles in the scale, and after all figs you will tear off.

The tile in the usual citric acid (food is good too, pretty lady, some dust) or rust Converter. For a long time not to leave the sponge hard and then gently. With tile going.

Well, tile is not the windshield))).

friend bit by bit cleans. First with kerosene, then blade, then some Polish.Prtsent 30 purely. In Khabarovsk, there is such a service as cleaning the windshield from the oxides and stuff, laser stuff. Said. that cost around 3 thousand vehicles on Pratice. But drugan configured differently. For the money, I said I'll clean and by decomposing the glass can.

It's just like my tile in the bathroom at home, laid tile, and then changed the towel, cut off the old grinder and is now in the same place all the tiles in the scale, and after all figs you will tear off.

The other vehicles on Pratice all points, it seems that either welding or grinder sparks. What can you recommend? The car had the black, also see these specks.

I forgot already when was the last time the sandpaper was taken. All circles, Yes pasta.

it is clear, he does not advocate "polishing under the sandpaper" but it happens, some scratches, well, nothing without it not to remove.

Trizact not an option. He, along with point and the smell of it. I tried .

Yeah, cutter-it. . every dot . . . I have used did not have the patience)) some trizcom grind is not an option in this case?

Not in store. Clay is usually enough.

Autograb didn't help?

Didn't even know about such things.

Now notice two-wheeled friend!

Vacation ?! Theoretically, in 2006-m to year . ) And to be everywhere helping me a black horse. On the penultimate photo grazing in the meadow . I'm not stuck in traffic, probably why always have time.

Volodya, you say the vacation was a long time after all? So still all the time and everywhere to go. Although the movement is life! And the work should bring joy-that's what I see in each report. Wait to leave and will write to you in detailing in full! And then all lay every time.

For a long time. Have Priscila tightly.

Long went he painted?

Now in the work machine with the same defect, painted pipes, painted over the whole car.Tomorrow the report will lay out)

There will be the same. With plastic that is not removed by anything.

I have (for the month it has eaten much. Gave to Polish — only on plastics and elastics .

+1 and MKAD Novoryazanskoe. Wanted to knock down stone "painter" but not dokinuli...

vovanych33

How and where did he come by car ? ? ?

In that year, on the ring road were painting the bridge at michurinka, drove under it, and all the same pattern on the face

Well, if the under the bridge Parking or Parking, then you can sue the road? They were obliged to warn?

Painted bridge, the car under the bridge. This is not the first case.

How and where did he come by car ? ? ?

The pavement ground.

and what is this RAID?

thank you ))

www.elektro-instrumenti.r...ZXREU4R2d4NVdkQWc0VVBFZzs

wov1

So I wrote that it was the bridge ground. The bridge was painted, here and here. It cutter it is not until the end of the cut.

And you can read more about the cutter?

I know what happens based on epoxy.

Saw, probably some other bridge ground.
Maybe the line eksperementiruyu)))

So I wrote that it was the bridge ground. The bridge was painted, here and here. It cutter it is not until the end of the cut.

Apparently your graska other origin:(
Shoe all oil-based well-scrubbed.

Ranging from traces of glue (from stickers factory), seals, ending with our favorite oil paint for sabourov)

646 solvent does not take it, not that Boot. I think I have not tried options ?
Take Dotterel plastic and glass ?

Gasoline-overshoe (Nefras) would take half an hour everything was wiped.
Colleagues as a new X-trail the month stood under the bridge in the winter and all covered with a layer of this shit.

Saved without polishing, etc.)

this is a time-consuming process
respect!

Yes paint will be more difficult, probably

Thanks for the advice . I know . There is certainly not cement.

we got all the cars are from emissions from the cement plant, are washed with vinegar-rubbed on "CHEERS"

I don't know. The origin of the stains of little interest to me . The problem in resolving them . This problem I have already solved.

And I wasn't near a whitewashed fence or something thread in this spirit? because the more the paint looks like where the concrete color, was the comrades of my this situation. In any case, I sympathize with this... no Bueno for Me Tajiks paint got fucked up a new car when the fences were painted lawn green ink well noticed the boiling water was all gone, even the varnish is not spoiled. Good luck.

Not an option . www.drive2.ru/b/1837476/ It was horrible.

Pretty baby turned out, the effect of a starry sky. To fill this on top of varnish with a handful of blisters, would be a unique view)

However. =)

That's not paint with a zinc filler.
I love myself I blurted out on the watch case. And thrown in a few years (the mechanism is out of order), and paint as nothing had happened . Wore this watch 24/7

was white metallic)

If hands grow from the right place, then no .

and cutter will not damage the paintwork?

Thank you.

Synthetic abrasive clay. Apply to clean paintwork before abrasive polishing. Having in its composition the abrasives slightly mates the surface, but at the same time removes oxides, inclusions, etc., However, does not always give the desired result as in the example.

What kind of clay is this the first time you hear it? And it's safe for paint and varnish covering of the car? Share your experience.

Tell your pox — no

It was the same when Tajiks began to paint a house, dark blue was the accent color "milky way". Had to Polish ((((

that's why I will never buy a black car

Also last year fell under this mist but not much as You have

Got too the car. The wind had thrown on the car purple paint, the entire right side was purple speckled getskow)
Thought Karcher schA will fall off, but no. The left half-spray to clean bitumen, uncredited, after 10min the car was clean. Generally pretty universal thing.

A little bit saved that the car was dirty and therefore wash most of the left.

Please accept my congratulations.

Oh yeah, I also "flour" the whole car on the MKAD Novoryazanskoye and sprinkled...

Said bridge was painted.

next apparently cement or asphalt plant is

Predator1689

I clay blue seemed very effective, the whole machine has passed we can say one piece, no scratches, no scratches, no traces of the paint left (I checked at first on a small segment, then looked in the garage under a bright light), maybe not as much paint of the village, but nothing else I scour he could not.

Right on! 3M blue clay rubbed jokingly. One piece on the whole car.
www.ebay.de/itm/2X3M-Perf...in_77&hash=item5d51c689c4

The process I have described.

Not yet tried! I wonder how paint interacts!

SerZhz

Me on the hood where it flew a piece of foam about 1cm by 2cm, broke off, and now as a trace of this remove, the blade is highly scratch, MB. does anyone know how to get rid of the scourge?

A pry bar is wiped with Dimexidum (lekrastvo sold in pharmacy and is worth a penny)

Will try, thanks!

look! Maybe you can help!

Me on the hood where it flew a piece of foam about 1cm by 2cm, broke off, and now as a trace of this remove, the blade is highly scratch, MB. does anyone know how to get rid of the scourge?

I rubbed blue and red. The result is the same. The piece brightens the eyes and turns into dust . Apparently you didn't have a lot of points.
It's not the first case and the clay is always rescued. But this time, I learned its limit.

I clay blue seemed very effective, the whole machine has passed we can say one piece, no scratches, no scratches, no traces of the paint left (I checked at first on a small segment, then looked in the garage under a bright light), maybe not as much paint of the village, but nothing else I scour he could not.

The clay there is a limit of concentration. In this example, it occurred on the second part. The clay just crumbled in his hands . Besides, you have the color white, it hides the fact what happened and what is left after clay. My task was to clean the points and make the car better than new.

It was the same, only smaller and mostly muzzle with mirrors, lights, grey paint on a white car, did not understand where it came from, Otterlo all clay 3M without a trace for an hour and a half.

)))) Heir. Cause when the real ambush, and his two hands is not enough. Besides young mind and eyes do their thing.

Maybe I have no clue what a crisis specialist?

Thanks, I'll keep in mind. :)

I trizcom removed these points. at the worst end of 2000, soft circle, and then polishing. the boat will cost you quite a lot, and it's more musorin and stains. to be able to handle it

Thanks, will have to look. :)

cutter buy in UP for example in response to avtomalyar. Well, as far as I remember, this thing is not cheap.

The polishing machine is, a paste buy, okay, thanks, will look for "cutter". :)

You can buy anywhere . The problem is that after applying the necessary restorative polishing .

My father Qashqai black is also in this shit covered, do not tell me what this "cutter" is and where you can buy it?

Because first we had to scrub point.

why not just polishing it to make? stupid question probably, but please explain.

In the same g... in salsa at the intersection of MKAD with Leninsky, where a new overpass. Now to be polished.

Removed white dots of paint.

and what clay and cutter Ter? just polished?

Hammer in the search engine "paint cutter" . I'm tired of screwing referring to. Natural clay scratches. Polishing or not, everyone decides for himself. If the machine glistened, it is likely that after application of the clay to Shine it will be gone.

Same garbage... Tried to scrub the clay. Rubbed but remain minor scratches. Or always have to Polish after? And what is the cutter?

Repainted is the last thing. It was worth a shot to get off . Native paint, all better than repainted .

At the time, Mostotryad in St. Petersburg for that paid a lot of dough, they restructure junction, on the same Parking lot, did not take action painted night. In the morning all were expecting a horror, you have almost not touched the car than it was in St. Petersburg, the paint is good quality ,45 years of age at the margin, the production in Sweden, insurance received all expenses, I got a little too but after a week of scrubbing already nesmogu not a large area -repainted helped

the solvent is not taken, and the nail Polish is not very good.

Rubbing this garbage solvent. All washed up.