Category \u0026quot

Hello!

The guys from the friendly parts store tormented, a neighboring shop that sells doors is very much a bright finish with a sign and its background, the shop is simply lost. Decided to hang the flag that dangled and attracted attention, but that's just the thing — the flag should be hung on the hollow column of ALUBOND. ALUBOND is this sandwich, a layer of plastic about 3mm thick between two thin layers of soft aluminum, is widely used by advertisers. Not very load-bearing structure, in short, it is necessary to spread the load in area point to fix it is impossible. Well, I took the guys to help :)

The stick on which will dress up your flag they gave me the piece of pipe in which the welded section of the tube is thinner, and after the seam protochen. Nothing so normal pipe, but that's only the seam machined on a taper, not linear as it turned out, in the end, like the surface of the ellipsoid of revolution. And of course the Murphy's law of the gusset plate that holds the pipe in a transverse plane occurred exactly on this klonopinbuy section :) I Learned this, though, in the process, because all were built without drawings, at the place.

So, how it was: take a little preferaby 20x20x1.5mm, bit 25 area and the ill-fated pipe, all cut, clean, driven and get this "ignition":

Driven by a plane fit.

Sawing-clean.

The corners took a lot of time and effort is a very complex surface connections to the pipe.

The result :)

On the other hand.

Note the shape and number of facets on the scarf made of area — all for the sake of full penetration welds loaded and the strength of the structure. Another note on the method of welding and the shape of the welded end of the actual "flastacowo" pipe — this solution will not allow moisture to gather inside the structure, it is important for the glands, living under the open sky.

Next, take a few pieces 25 area, from studs M8 to cut the appropriate segments of the fastener affixed to one another used svarochnik and voila:

Almost ready!

The case for small — segment preferaby 20x20x1.5mm make a couple of clamps that the whole structure will be attracted to the column:

Prijimaci.

Everything in the collection!

Now fully ready! We clean, give the owners on color and after a couple of days observed that:

That's the way it looks on the column.

And so from afar. The flag should be another, this duplicates the design of the signs and is lost on its background. I suggest the Russian tricolor, is IMHO very contrasting, bright and Patriotic — just what the doctor ordered!

Guys happy — the village is on the pipe tight, prekratilis very tough and durable and easy to dismantle. But once the people are happy, then I'm happy :)

See you soon!